Hi there,
I put a 1600 carby in my 92 sierra, I originally had a conversion plate for the gearbox, but after finishing the conversion I was having problems with my starter motor, it would make a horrible sound like a crunching sound and would eventually wear out my starter
so I took the gearbox out ripped the plate off took it down to Joe at 4play and he welded on some tabs so that 1.6 would bolt straight to the gearbox without a plate between, BUT I am still having problems with my starter.
I got my starter reconditioned and within a month it started making some wired noises on startup after a few tries it would start but over the next week it got a lot worse and now Its just rooted.
The engine runs fine but I have had nothing but headaches with the starter motor,
Is there anybody out there who may know what the core problem may be I have tried everything!!!
Dan!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 conversion- starter problems
When you fit a 1.6 to a sierra you need to grind the side of the starter motor to make it clear the block. the 1.6 block is a little wider. If you havent the starter will be running on the piss and bugger up fairly quickly.
The other option is to fit a reduction drive starter, it has a much smaller body and clears the block to rectify the problem.
The other option is to fit a reduction drive starter, it has a much smaller body and clears the block to rectify the problem.
93 NJ,5 speed,2" body lift,32" muddies
There's nuttn like momentum
There's nuttn like momentum
had a similar prob with mine. i bought a brand new 1.6 starter(efi) and it was still doing it. then i got a machined flywheel to suit the starter and it still did it. then i got a spacer for the starter and it still did it. then i took the starter back to suzisport and it was faulty so they swaped it over and it works fine now( no spacer needed with mine but some starters need it).
id say take the flywheel out and check the teeth on the stater fit and that there are 8 teeth. my old starter had 9 teeth and grinded a bit of the flywheel. if u doint know what u r doing take them both to grahm at suzisport springwood. he fixed mine.
id say take the flywheel out and check the teeth on the stater fit and that there are 8 teeth. my old starter had 9 teeth and grinded a bit of the flywheel. if u doint know what u r doing take them both to grahm at suzisport springwood. he fixed mine.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
ok,
1.3 starter.
the flywheel is brand new and the starter is brand new.
i had a plate from ben in new newzealand, i also grinded the side of the starter to make it fit and i still had problems, thats when i decided to get rid of the copnverstion plate and weld tabs on the gearfbox so that the starter would hit the flywheel correctly and not just skim it.
when i got my startermotor reconditioned it worked fine without noise and it would start up everytime without fail no noise nothing, within 3 weeks it started playing up making noise on startup and wouldnt start up, now i cant even turnover.
if the flywheel is brand new and the starter was brand new how can it stuff up within a month.
Dan!
1.3 starter.
the flywheel is brand new and the starter is brand new.
i had a plate from ben in new newzealand, i also grinded the side of the starter to make it fit and i still had problems, thats when i decided to get rid of the copnverstion plate and weld tabs on the gearfbox so that the starter would hit the flywheel correctly and not just skim it.
when i got my startermotor reconditioned it worked fine without noise and it would start up everytime without fail no noise nothing, within 3 weeks it started playing up making noise on startup and wouldnt start up, now i cant even turnover.
if the flywheel is brand new and the starter was brand new how can it stuff up within a month.
Dan!
dodgy reconditioning. i had a brand new starter and was stuffed!
id say go to suzisport and tell them to put a new one in and if it works then buy it, its only $200 with grahm plus $20 for putting it in or u can put it in. point is try another starter.
id say go to suzisport and tell them to put a new one in and if it works then buy it, its only $200 with grahm plus $20 for putting it in or u can put it in. point is try another starter.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Have you got a "clicky starter fix" relay in your zuk?
If not, try sticking one in, so that the key switches the relay and the relay powers the solenoid.
Its a really common problem on zuks, and usually just causes the starter to click, not turn, but sometimes they will grind instead.
http://www.clickystarter.com/index_0.html
http://www.izook.com/reviews/clicky_fix/clickyfix.htm
Failing that, you need to try a 1.6 narrow body starter.
Ben
If not, try sticking one in, so that the key switches the relay and the relay powers the solenoid.
Its a really common problem on zuks, and usually just causes the starter to click, not turn, but sometimes they will grind instead.
http://www.clickystarter.com/index_0.html
http://www.izook.com/reviews/clicky_fix/clickyfix.htm
Failing that, you need to try a 1.6 narrow body starter.
Ben
WWW.ZUKPARTS.COM - Quality Suzuki Off-road Parts - 1600 Adaptor kits - Vitara Power Steering adaptor kits - Disc brake kits - Heavy Duty Transfer case arms & more
da
thanks for ya help, i am going to get a working starter motor and see how it all goes. hopefully it was just a dodgy starter.
if all fails where and how much is a 1.6 narrow starter?
maybe the hole problem is that i need a 1.6 starter instead of my 1.3 starter?
Dan!
if all fails where and how much is a 1.6 narrow starter?
maybe the hole problem is that i need a 1.6 starter instead of my 1.3 starter?
Dan!
Re: ben
It's just a simple relay that any auto sparky can do for you. Shouldn't cost that much in parts, just the time i suppose.danniboy wrote:hey ben,
how much would this clicky system cost and can i get it done in melboune?
Dan!
Parts are about $10 - it's just a relay on the starter wire (black with a yellow trace) to ensure the starter solenoid gets 12V.
It helps the starter solenoid to pull in fully ensuring it engages.
Check the auto electrical forum, there will be information about how to wire a relay.
Steve.
It helps the starter solenoid to pull in fully ensuring it engages.
Check the auto electrical forum, there will be information about how to wire a relay.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: Bing [Bot] and 0 guests