Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
landcruiser HJ60 RPM tacho
Moderators: toaddog, Elmo, DUDELUX
landcruiser HJ60 RPM tacho
hi guys i have a HJ60 and the RPM tacho work when it wants....how do i fixs it???
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
tacho
if we an geta serious answer to this, it would be great. i have the same issue but never bothred to do anything but if someone knows a common problem it would be great and even better if they know a remedie for the problem......
Cheer all
Cheer all
do you know if its the tacho sender or the guage? You should be able to find the sender from a wreckers to test.. although i have had a dodgy guage on my bj42 (confirmed by replacing the sender)..
they are known to go due to their location and getting covered in crap.. (at least with the 40's not sure about the 60's)
they are known to go due to their location and getting covered in crap.. (at least with the 40's not sure about the 60's)
drasticeagle60 wrote:hi Nat84
I have had this problem before it turned out to be a
loose connection in the circuit board on the back of the tacho
after great inspection of the board i found a hairline crack in a solder
joint so a bit of work with sordering iron and it hasen't missed a beat
i hope this helps
mick
thanks for that....i think you may be right because if i hit it hard enough it will work again
cheers
Nat
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Nat84 wrote:where was the circuit board cracked?
from what you said about hitting it you have a solder joint come loose
so look for any sort of inperfetion in the solder joins mine was a minor
crack on solder joint simmlar to this on this link
this isnt of the tacho it was just to show what to look for
http://www.ami.ac.uk/courses/topics/015 ... sj_phd.jpg
mick
Who is online
Users browsing this forum: No registered users and 0 guests