Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rover Diffs from a 92 "Sherwood" Classic.

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 27
Joined: Wed May 02, 2007 3:49 am

Rover Diffs from a 92 "Sherwood" Classic.

Post by rangiesport »

just wondering if these would fit a 94 model discovery 3.9 petrol automatic
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Yep, but why??

They're to dear and they're 10 spline junk :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 27
Joined: Wed May 02, 2007 3:49 am

Rover Diffs from a 92 "Sherwood" Classic.

Post by rangiesport »

just wondering if this is a cheaper option to 600 odd dollars to replace a front left hand stub axle
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

rangiesport wrote:the short part that sticks out from the cv joint. It has completly snapped. Front wheel fell off completely. The long shaft part of the axle appears to be fine.
Hope you don't mind, but better off in here than PM :armsup:

Well, If your desperate, they will fit in fine, complete, but I'd be haggling the fark out the price, I've got 24 spline Disco diffs complete, I'd take $400 for, for a good pair complete of 10 spline diffs, which I've got a few :D you could have for 4 slabs of Melbourne ;)

Shame your not in Vic :cry:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

cloughy wrote:
rangiesport wrote:the short part that sticks out from the cv joint. It has completly snapped. Front wheel fell off completely. The long shaft part of the axle appears to be fine.
Hope you don't mind, but better off in here than PM :armsup:

Well, If your desperate, they will fit in fine, complete, but I'd be haggling the fark out the price, I've got 24 spline Disco diffs complete, I'd take $400 for, for a good pair complete of 10 spline diffs, which I've got a few :D you could have for 4 slabs of Melbourne ;)

Shame your not in Vic :cry:
Are you selling these diffs? What do you know about them? How do you know what they are worth? I'd appreciate it if you did not discuss my price on the board please. He did not ask you what they were worth.
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

BBM Rick wrote:
cloughy wrote:
rangiesport wrote:the short part that sticks out from the cv joint. It has completly snapped. Front wheel fell off completely. The long shaft part of the axle appears to be fine.
Hope you don't mind, but better off in here than PM :armsup:

Well, If your desperate, they will fit in fine, complete, but I'd be haggling the fark out the price, I've got 24 spline Disco diffs complete, I'd take $400 for, for a good pair complete of 10 spline diffs, which I've got a few :D you could have for 4 slabs of Melbourne ;)

Shame your not in Vic :cry:
Are you selling these diffs? What do you know about them? How do you know what they are worth? I'd appreciate it if you did not discuss my price on the board please. He did not ask you what they were worth.
I sell diffs, I know they're stock Rover diffs and your asking to much

Just offering advice to a bloke who needs help, You wouldn't have a problem with me discussing the price If i thought they were cheap would you :roll:

Don't want to see him pay to much ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

cloughy wrote:
BBM Rick wrote:
cloughy wrote:
rangiesport wrote:the short part that sticks out from the cv joint. It has completly snapped. Front wheel fell off completely. The long shaft part of the axle appears to be fine.
Hope you don't mind, but better off in here than PM :armsup:

Well, If your desperate, they will fit in fine, complete, but I'd be haggling the fark out the price, I've got 24 spline Disco diffs complete, I'd take $400 for, for a good pair complete of 10 spline diffs, which I've got a few :D you could have for 4 slabs of Melbourne ;)

Shame your not in Vic :cry:
Are you selling these diffs? What do you know about them? How do you know what they are worth? I'd appreciate it if you did not discuss my price on the board please. He did not ask you what they were worth.
I sell diffs, I know they're stock Rover diffs and your asking to much

Just offering advice to a bloke who needs help, You wouldn't have a problem with me discussing the price If i thought they were cheap would you :roll:

Don't want to see him pay to much ;)
So you have basically just stuck your nose in. Nobody asked what the value was, you took it upon yourself. Please, just mind your own business.
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

BBM Rick wrote:
cloughy wrote:
BBM Rick wrote:
cloughy wrote:
rangiesport wrote:the short part that sticks out from the cv joint. It has completly snapped. Front wheel fell off completely. The long shaft part of the axle appears to be fine.
Hope you don't mind, but better off in here than PM :armsup:

Well, If your desperate, they will fit in fine, complete, but I'd be haggling the fark out the price, I've got 24 spline Disco diffs complete, I'd take $400 for, for a good pair complete of 10 spline diffs, which I've got a few :D you could have for 4 slabs of Melbourne ;)

Shame your not in Vic :cry:
Are you selling these diffs? What do you know about them? How do you know what they are worth? I'd appreciate it if you did not discuss my price on the board please. He did not ask you what they were worth.
I sell diffs, I know they're stock Rover diffs and your asking to much

Just offering advice to a bloke who needs help, You wouldn't have a problem with me discussing the price If i thought they were cheap would you :roll:

Don't want to see him pay to much ;)
So you have basically just stuck your nose in. Nobody asked what the value was, you took it upon yourself. Please, just mind your own business.
Yep and ahhh, No :armsup:

That's correct I took it upon myself to help save a fellow rover owner some coin, sorry for not being an Asshole and supporting a sale of something I see as overpriced :roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

You left one out. That is jepordise my sale. Thanks heaps.
rick@offroadmediagroup.com.au
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

There only rangie diffs shyte just cause they came from a sherwood dont mean shyte id only pay $250 for the pair max tho they would have to be in top condition to be worth that much cloughy was only stating the facts and hes right and it sounds like your trying to make money with a name like usual :bad-words: :bad-words: :bad-words: :bad-words: dont be such a tight ass :lol: :lol: :lol: :lol: :lol:
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

lokka wrote:There only rangie diffs shyte just cause they came from a sherwood dont mean shyte id only pay $250 for the pair max tho they would have to be in top condition to be worth that much cloughy was only stating the facts and hes right and it sounds like your trying to make money with a name like usual :bad-words: :bad-words: :bad-words: :bad-words: dont be such a tight ass :lol: :lol: :lol: :lol: :lol:

WTF??? I really dont get what your point is. For your info, they are in top condition, recently rebuilt throughout. How the hell am I trying to make money with a name? What name? Are you on drugs? What Im asking and what id sell for are two different things, so how do you know if im a tight arse or not? I guess opinions are like clits.......
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

BBM Rick wrote:You left one out. That is jepordise my sale. Thanks heaps.
Saved him some coin :armsup:

Look I did say haggle the fark out the price, I'm sure you'd probably move..... a fair bit I'd hope

But if the poor dude walked up with $500 you'd sell them to him, Sorry but I don't see how that's bad on my behalf
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

cloughy wrote:
BBM Rick wrote:You left one out. That is jepordise my sale. Thanks heaps.
Saved him some coin :armsup:

Look I did say haggle the fark out the price, I'm sure you'd probably move..... a fair bit I'd hope

But if the poor dude walked up with $500 you'd sell them to him, Sorry but I don't see how that's bad on my behalf
Of course id negotiate, but if i dont ask....
And yes, of course i would sell them at the asking price if the buyer felt he was happy to pay. But that is not for you to decide, is it?
I think we will agree to disagree, as I dont really see any point carrying on with this.
rick@offroadmediagroup.com.au
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

BBM Rick wrote:
lokka wrote:There only rangie diffs shyte just cause they came from a sherwood dont mean shyte id only pay $250 for the pair max tho they would have to be in top condition to be worth that much cloughy was only stating the facts and hes right and it sounds like your trying to make money with a name like usual :bad-words: :bad-words: :bad-words: :bad-words: dont be such a tight ass :lol: :lol: :lol: :lol: :lol:

WTF??? I really dont get what your point is. For your info, they are in top condition, recently rebuilt throughout. How the hell am I trying to make money with a name? What name? Are you on drugs? What Im asking and what id sell for are two different things, so how do you know if im a tight arse or not? I guess opinions are like clits.......
Ok we will start with the name bit "SHERWOOD" sounds classy must have gold plated diff bungs ....

My point on condition the ad says swivels done no leaks now you say recently rebuilt throughout ....

Price well i ad ONO to my ads if im open to offers and so do most other people you state a price and say come get em sounds like ya want that for em so my opinion tight ass .....

As for the on drugs bit yes i am and good ones too maby u could do with some too ......

If you cant take a bit of constructive critasisim public forum's aint the place for u man ..... :armsup: :armsup: :armsup:
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

lokka wrote:
BBM Rick wrote:
lokka wrote:There only rangie diffs shyte just cause they came from a sherwood dont mean shyte id only pay $250 for the pair max tho they would have to be in top condition to be worth that much cloughy was only stating the facts and hes right and it sounds like your trying to make money with a name like usual :bad-words: :bad-words: :bad-words: :bad-words: dont be such a tight ass :lol: :lol: :lol: :lol: :lol:

WTF??? I really dont get what your point is. For your info, they are in top condition, recently rebuilt throughout. How the hell am I trying to make money with a name? What name? Are you on drugs? What Im asking and what id sell for are two different things, so how do you know if im a tight arse or not? I guess opinions are like clits.......
Ok we will start with the name bit "SHERWOOD" sounds classy must have gold plated diff bungs ....

My point on condition the ad says swivels done no leaks now you say recently rebuilt throughout ....

Price well i ad ONO to my ads if im open to offers and so do most other people you state a price and say come get em sounds like ya want that for em so my opinion tight ass .....

As for the on drugs bit yes i am and good ones too maby u could do with some too ......

If you cant take a bit of constructive critasisim public forum's aint the place for u man ..... :armsup: :armsup: :armsup:
Public forums Im ok with, critisism I cop all day every day, so no hassle there. In my opinion though, the price issue was not bought up for discussion by rangiesports, so I dont think it is anyone elses business. Thats all.
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

BBM Rick wrote: I think we will agree to disagree, as I dont really see any point carrying on with this.
Sounds good
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

SOLD :finger:
rick@offroadmediagroup.com.au
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

BBM Rick wrote:SOLD :finger:
So??
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I don't see where the problem is. I hope someone will let me know if I am about to buy something that they think is over priced.

I sell suspension stuff and had people comment about it with the facts a bit wrong and yes it is annoying but I got over it and quickly, before I decided to post up.

I made corrections to the error in the post but I didn't flame someone for trying to help.

So please if somone thinks a price seems a bit rich let me know and quick.

Shane.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

4WD Stuff wrote:I don't see where the problem is. I hope someone will let me know if I am about to buy something that they think is over priced.

I sell suspension stuff and had people comment about it with the facts a bit wrong and yes it is annoying but I got over it and quickly, before I decided to post up.

I made corrections to the error in the post but I didn't flame someone for trying to help.

So please if somone thinks a price seems a bit rich let me know and quick.

Shane.
It would have saved me a few thousand dollars on the over priced Rangie I bought :bad-words: :bad-words: :bad-words: :bad-words:
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

4WD Stuff wrote:
4WD Stuff wrote:I don't see where the problem is. I hope someone will let me know if I am about to buy something that they think is over priced.

I sell suspension stuff and had people comment about it with the facts a bit wrong and yes it is annoying but I got over it and quickly, before I decided to post up.

I made corrections to the error in the post but I didn't flame someone for trying to help.

So please if somone thinks a price seems a bit rich let me know and quick.

Shane.
It would have saved me a few thousand dollars on the over priced Rangie I bought :bad-words: :bad-words: :bad-words: :bad-words:
haha any rangie that isnt free is over priced :D
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests