Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My $200 stockman is nearly ready to rock and roll except for the oil that flows constantly from rh front swivel housing.Just enquiring if theses are similar set up to hilux/cruiser and have a small seal in the end of the axle tubing.Any assistence or tips on this would be appreciated.
P.S. i might not be able to thank yous for info till friday as i have to work away from this computor.
Yep there is an inner oil seal ..
You will need to replace it as well as repack your CV with grease as the oil will have disolved it .. It is just like a Hilux\crusier but a bit smaller ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Thanks lov-mud,i have done heaps of cruiser and hilux seals so i just wanted to make sure i was in the right direction.just love that molybdenum disulphide grease as it gets eveywhere and is really clean!!!.
Thanks for the info mate.
My $200 stockman is nearly ready to rock and roll except for the oil that flows constantly from rh front swivel housing.Just enquiring if theses are similar set up to hilux/cruiser and have a small seal in the end of the axle tubing.Any assistence or tips on this would be appreciated.
Thanks lov-mud,i have done heaps of cruiser and hilux seals so i just wanted to make sure i was in the right direction.just love that molybdenum disulphide grease as it gets eveywhere and is really clean!!!.