Hey guys .
well iv got a 91 sierra. and iv got a problem it just turned up and wasnt like i have been driving it allot or on a big trip where something could of broke. i just turned her on one day and the indicators where not working .
i have looked through all the fuses and found the fuse that keeps blowing.
iv changed the fuuse around 3 times now and within 1 minute its blown again.
i was told to look through the wires near the lights indicators etc. but i cannot see anyhting. there was 1 wire that was hanging down but i found where that was ment to go ( i think) and i placed the wire around the thread of the screw that holds the connector on. so i think that would of been ok ???
any ideas guys ???
ps i can take a pic of the connector im talking about if you need it.
Cheers guys looking forward to your responses.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
indicator fuse keeps blowing.
indicator fuse keeps blowing.
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
how exactly can i tell which wire is earthing out, should i be looking for lose wires ? or breaks down the wire that could be touching someithing ?
cheers mate
cheers mate
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
You're looking for broken wires touching metal. Try undoing that wire you earthed and just tape it up, it may not be an earth. If it fixes the problem then trace that wire to see what it should operate. The whole wiring setup in the back end is crap from factory. Too many loose wires and self-tapping screw earths.
didnt have any luck. it was a black cable that i re attached to the chassis.want33s wrote:How'd you go Vicelore?
Usually it's only black wires that go to earth.
If you see any others touching the body or chassis that could be your problem.
Check the trailer plug too.. if you have one.
i booked it in at my local mechanic to get a few things done on Fri so hes gonna have a look for me.
unless you guys have any other ideas. ps i dont have a trailer plug ( that i have seen hehe.)
Cheers guys
91 SWB sierra, 2in spring lift, 2in BL 32 simex ETs, Series 4 RH gearing.
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
[url=http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=110288&highlight=]My build up thread[/url]
Who is online
Users browsing this forum: No registered users and 2 guests