Hello
I have been here many times already trying to get help with fitting hilux diffs to a narrow track sierra, 1988 to be exact. A lot of people have helped however im still not getting far. If someone has photos or can tell me where i can see one that has been finished, it would be great. My main problem is the drive line and uni's at bad angles. Also the cross member which holds the gearbox.
Thanks for any help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suzuki sierra, hilux diffs, need help
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
germo wrote:well if you can show us a picture it might help aswell.
are your unis bad because you have huge lift, ot the fact that the rear diff is offset to the transfer output?
and I cant think why the gearbox crossmember is in the way.
ashley
He might have the front driveshaft hitting hte crossmember at full droop?
Post some pics up and let us have a look
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
I'll try and get some pics up as soon as i can.
But yes the problem with the uni's is the side ways angle from the transfer. But when i moved the transfer case over an inch or so it got rid of the vibs but now the front drive shaft hits of the cross member. It hits where the cross member bends down from the gearbox mount, then it goes under that front drive shaft.
Just also a random question, what did you all do for wheel guards?
But yes the problem with the uni's is the side ways angle from the transfer. But when i moved the transfer case over an inch or so it got rid of the vibs but now the front drive shaft hits of the cross member. It hits where the cross member bends down from the gearbox mount, then it goes under that front drive shaft.
Just also a random question, what did you all do for wheel guards?
Who is online
Users browsing this forum: No registered users and 2 guests