Hi
I accidentally touched the braided hose on one of the bolt/wire of the alternator and it created a little spark.
Now my indicators stopped working, everything else is working fine.
Tested the flasher can swapped it with the hazard light one and works fine.
Checked the under dash fuse and its not blown.
Found a melted fusable link and just a quick fix, I connected up an inline fuse with 15amp and was getting a reading of 6v and swapped the fuse with 20 amps and getting 12v from the tip of the wire.
But the indicators STILL NOT WORKING, what am I missing???
Can anyone please help me out, need the patrol ASAP for work.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Patrol INdicators stopped working
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 0 guests