Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tightening front wheel bearings

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 1
Joined: Mon Jan 21, 2008 10:35 am
Location: Melbourne

Tightening front wheel bearings

Post by japero1 »

I have a 99 model NL Pajero auto front hubs.Want to know how to access front wheel bearings to repack and tighten.
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

I would seriously doubt you have auto hubs. They were discontinued in 1990.

But to repack them, Wheel off, 6 nuts holding drive flange off, centre cap off, circlip off, washer out,
Then you will see 2 heavy screws that I seem to always need an impact driver to get off, take brake assembly off and tie out of the way (don't undo break lines as you don't have too)

Un screw bit the screws hold in place, slip rotor off and violah
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

NJV6 wrote:I would seriously doubt you have auto hubs. They were discontinued in 1990.
Nope my NL has auto hubs, unless you ment that you doubt he has manual hubs, as I believe all Pajeros from 1990 onwards had auto hubs.
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

If you have super select then no auto hubs. There were some with the part time 4WD that proabaly had manual hubs (In NZ anyway).

Auto hubs finished with the introduction of the Gen 2 Pajero late 1990 or 1991 (whenever it was)

Or you could prove me wrong with pic's :cool: There have been random things before.....


OR - are you confusing auto hubs with the vacuum front diff disconnect?
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 195
Joined: Sat Mar 11, 2006 3:14 pm
Location: central coast nsw

Post by siggie »

looks like your gunna get dirty dane
Stik It Signs
Posts: 12
Joined: Tue Aug 16, 2005 8:24 am
Location: Brisbane

Post by mrbitchi »

NJV6 wrote:If you have super select then no auto hubs. There were some with the part time 4WD that proabaly had manual hubs (In NZ anyway).

Auto hubs finished with the introduction of the Gen 2 Pajero late 1990 or 1991 (whenever it was)

Or you could prove me wrong with pic's :cool: There have been random things before.....


OR - are you confusing auto hubs with the vacuum front diff disconnect?
My 92 NH definitely had auto hubs :finger:
John
NM GLS
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests