Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

speedo recalibrated... sydney??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

speedo recalibrated... sydney??

Post by Mousie »

any one know were i can get my speedo recaibrated n

need to for engineering ... so yeh if u know were an rough cost let me know please

cheers
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: speedo recalibrated... sydney??

Post by bogged »

Posts: 352
Joined: Mon Dec 23, 2002 9:10 pm
Location: Sydney

Post by 65Mog »

Ron McMullen
Unit 13 - 11 Bowmans Rd Kings Park Ph. 02 9621 8190

General Auto Instruments - Dave
21 East St Lidcombe Ph. 02 9649 1442
Posts: 145
Joined: Tue Jun 13, 2006 8:00 pm
Location: coffs harbour

Post by naif »

do it yourself with one of these kits and a GPS.

http://www.jaycar.com.au/productView.as ... BCATID=347
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

that jaycar kti is a fucking ausome idear....
jsut hope it works...
but i need a cirtificate for teh engineer ????

i`ll ring him tomorro n find out cos thats mad i can run all difernt tyres sizes
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Posts: 145
Joined: Tue Jun 13, 2006 8:00 pm
Location: coffs harbour

Post by naif »

the kits do work aslong as you soldier them together correctly.

jaycar make a heep of kits that are very handy, and can cut A LOT of the cost off of things.

i know the kits work as the guys at rslibertyclub.org use them.

th kit alters the signal between speedo sensor and the speedo.

last i knew the engineer would test the vehicles speed and compare it to a gps ?
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Have you just fitted bigger tyres or something????????

Why not just change the cog to suit???????

http://www.patrol4x4.com/forum/showthre ... speedo+cog
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Posts: 145
Joined: Tue Jun 13, 2006 8:00 pm
Location: coffs harbour

Post by naif »

that Would also work, but how accurate are the standard speedos with standard tyres? ADR states that a speedo can be upto +/-10%

GQ's are fitted with an electronic speedo, why not take advantage of it?

the jaycar kit can also be calibrated at anytime, no need to buy extra cogs each time you change tyresizes. not to mention the diameter variation found between different tyre brands.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

BIG GQ wrote:Have you just fitted bigger tyres or something????????

Why not just change the cog to suit???????

http://www.patrol4x4.com/forum/showthre ... speedo+cog
Is there any way to find out how many teeth on the cog for a 4.2 diesel GQ with 4.1 diffs with out pulling it out and counting?
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

its very easy to pull out but for $50 that jcar kit sounds awsome.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

matto wrote:its very easy to pull out but for $50 that jcar kit sounds awsome.
Easy but messy. I've pulled mine out when I took the transfer case out but it is much easier to ask online than get under the car and get covered in oil. :) Don't think there will be one low enough for 37s though. :cry:
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

problem with these simple fixes like jaycar kits and swapping the cog, you still need to get it check and certified by a speedo place so you can get the cirtificate for your engineer, i know this as i used the same guy, he needs the piece of paper to cover his ass,
Posts: 18
Joined: Thu Mar 01, 2007 6:42 pm

Post by bcrheat »

Just wondering if anyone knows anything about the marks adaptors ratio boxs? Is that a good way to recalibrate?
Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Hi

I put a Mark adapter in my GU and it is awesome. instructions are great but the only thing it didnt tell me was that i needed a hole saw to go through the transmision tunnel $50

Easy to set up and it gave me settings for different tyre sizes.
I did check also with GPS to tweak it.

I also used one of the Jacar adapters on my road bike which I think they may have stopped selling.

I would not have got the jacar one working if I didnt have help from another guy who tested it all out and had all the settings for me.

Jacar $50
Marks $195 plus the cost of a hole saw.

Id say Marks was well worth the extra cost for ease of installation.

Cheers
2000 GU II 4.2TD
Post Reply

Who is online

Users browsing this forum: No registered users and 84 guests