Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

CAV filter

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

CAV filter

Post by macklux83 »

Hi everyone, yesterday while changing my fuel filter i broke the glass bowl on my CAV setup, can anybody tell me where is a good place to buy a replacement either in country Victoria or Melbourne, or if anybody has a spare laying around let me know what you want for it.
cheers
rob
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

try a truck or tractor shop

New complete units are pretty cheap at supercrap and you get a free filter

i only pay $5 a filter so avoid supercrap,etc for replacemet filters
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Post by GUJohnno »

Hiflow have them. I used them when I bought some new injectors. Good company, situated in Springvale.

I have been using the Donaldson filters lately on mine. Under $5.00 from Truck Bits in Dandenong.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 1585
Joined: Wed Jan 04, 2006 9:30 pm
Location: Western Sydney

Post by Toli »

I am not in victoria but got them from Mr Filter in Sydney when mine broke twice. After the second time I pissed the whole thing off and went back to an original toyota system with the sensor at the bottom for water. The CAV would only last to 5k kms if I was lucky. The toyota filter has not casued me any problems and glad I made the change back even if it does cost me a bit more. Look up filter shops in the yellow pages, I just rang around until a place had them.
Dave, Nat, Braiden, Ethan and now Elizabeth

Bye Bye 80 Series............Hello XR6T
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Toli wrote:I am not in victoria but got them from Mr Filter in Sydney when mine broke twice. After the second time I pissed the whole thing off and went back to an original toyota system with the sensor at the bottom for water. The CAV would only last to 5k kms if I was lucky. The toyota filter has not casued me any problems and glad I made the change back even if it does cost me a bit more. Look up filter shops in the yellow pages, I just rang around until a place had them.
I run 2 in parallel and havent had a prob for over a year.

Been to stocko, last week went on a 1200k round trip including a fast run from adaminaby-canberra via namadji nat park.

Im on leafs all round, IF mine and a million other tractors and trucks can Use them and enjoy them, Perhaps there is a reason why yours broke.

A metal bowl is available also ;)
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

we run the CAV filters on 2 of our GQ's n have never broken a bowl in 5 years, they are mounted in standard position on an adaptor from denco. If you have broken the bowls how did you brake them? did you over tighten the thumb screw? are they exposed to stoned ect?
Posts: 1585
Joined: Wed Jan 04, 2006 9:30 pm
Location: Western Sydney

Post by Toli »

pongo wrote:
Toli wrote:I am not in victoria but got them from Mr Filter in Sydney when mine broke twice. After the second time I pissed the whole thing off and went back to an original toyota system with the sensor at the bottom for water. The CAV would only last to 5k kms if I was lucky. The toyota filter has not casued me any problems and glad I made the change back even if it does cost me a bit more. Look up filter shops in the yellow pages, I just rang around until a place had them.
I run 2 in parallel and havent had a prob for over a year.

Been to stocko, last week went on a 1200k round trip including a fast run from adaminaby-canberra via namadji nat park.

Im on leafs all round, IF mine and a million other tractors and trucks can Use them and enjoy them, Perhaps there is a reason why yours broke.

A metal bowl is available also ;)
Mine was only single, it could have been over tight but who knows. Luck had it I found the problem while at home. Too bad if it had been a trip, in the end I decided I wanted the water sensor connected so just went back to a standard set-up.
Dave, Nat, Braiden, Ethan and now Elizabeth

Bye Bye 80 Series............Hello XR6T
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

nastytroll wrote:we run the CAV filters on 2 of our GQ's n have never broken a bowl in 5 years, they are mounted in standard position on an adaptor from denco. If you have broken the bowls how did you brake them? did you over tighten the thumb screw? are they exposed to stoned ect?

i broke mine by dropping it on the concrete during a filter change, ive had it on the ute for about 4-5 years and never had a problem with it.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests