Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheap cable for a high mount winch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Cheap cable for a high mount winch

Post by LuxyBoy »

Hi Guys wanting some new steel cable for my highmount.
I am in Brisbane, QLD but if it is cheap enough the freight should not matter.

Who sells this cheaply :?:
ARB want $250 for 30m

Are there different quality and brands :?:

Are they all just steel or is there something that will not rust :?:

Already decided on steel and not plasma so please don't let this become another debate on that :roll:
Kind Regards,
Brad
Top
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

Try boat and ship supply shops they often make cables to suit.
Anything is possible, it just comes down to time and money.
Ferals build www.outerlimits4x4.com/ftopic164570.php
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

I thought about that and wasn't sure if it was the same stuff. I'll call some tomorrow.
Kind Regards,
Brad
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

chain n cable factory last I looked were ok
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Maybe ring beaver here in sydney and ask abotu pricing+freight or perhaps a distributer in brissy.

anywhere should be cheaper than arb, although theres is probly an off the shelf item, which is why we go there.

Cheers
Top
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

Post by FastEddie »

Any of the lifting equipment mobs should be able to sort you out, they'll sell it to you by the meter with whatever ends you want on it. Just take in a sample of the current cable and they'll match it.
Top
Posts: 65
Joined: Tue Aug 08, 2006 6:52 pm
Location: Brisbane

Post by tommyk »

try ebay, i always see people selling steel winch cable for under 100 bucks at 30metres, when people buy a winch and go straight to plasma rope. Like this for instance http://cgi.ebay.com.au/WARN-9000lb-WINC ... dZViewItem
we're here for a good time, not for a long time
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

chain n cable factory told me $140 for 46m of steel with swaged ends, that was a while ago though
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

If you get it from a lifting place make sure you get it Gal so it handles the weather.
I didn't, but i clean mine and spray it with CRC or similar regulary and its ok so far.
You should be able to get 45m of 9mm cable on a highmount so don't but 30.
Cheers Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

Ruffy wrote:If you get it from a lifting place make sure you get it Gal so it handles the weather.
I didn't, but i clean mine and spray it with CRC or similar regulary and its ok so far.
You should be able to get 45m of 9mm cable on a highmount so don't but 30.
Cheers Dan
Thanks to all replys :armsup:

Ruffy - is that 45m on a standard drum :?: i was looking at getting the thinner drum to gain more length.
Kind Regards,
Brad
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

If you want a standard length you could ask on here for someone that has changed their cable to rope. ;)
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

LuxyBoy wrote:
Ruffy wrote:If you get it from a lifting place make sure you get it Gal so it handles the weather.
I didn't, but i clean mine and spray it with CRC or similar regulary and its ok so far.
You should be able to get 45m of 9mm cable on a highmount so don't but 30.
Cheers Dan
Thanks to all replys :armsup:

Ruffy - is that 45m on a standard drum :?: i was looking at getting the thinner drum to gain more length.
Yep i had 45m on a standard drum.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 105 guests