Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Urgent!!!

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Urgent!!!

Post by wolfengo »

Just then ma rangie would not start because the starter motor wont turn ova. :bad-words:

Anyway i wiggled the wires about tried it agen not wrking so i got the trusty multimeter out and theres power to the starter motor but no power to the part dat engages the solinoid thus the startermotor.

I took the starter motor out cos i thought it could be the solinoid but it isnt (i tested by using jumper leads there all good).

So i was thinking dat it is the wiring somwhere. My Question is could it be the ignition switch or a fuse or somthin lyk dat its just i need ma rangie more den ever at the moment and i get dis problem plz help :!: :!:
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 177
Joined: Fri Dec 19, 2003 11:49 am
Location: Perth WA

Post by Lucus »

wat wif das sms ritin? its hrd 2 reed.

Aussming it not an auto and hasnt been left in gear?

How did you check the starter? Did you hook up the leads to the +ve starter terminal on the starter and the -ve post and the jump from the +ve terminal to the solenoid?

You definatly have no power with the key in the start postion at the solenoid?

Does the car have an imboliser fitted?

Have you gone through and checked all the fuses with you multimeter?
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

I have had the same problem was the relay.
gas grass or arse no one rides for free
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

Sorry about the writin guys :oops:

Its manual and has a immobilizer fitted but im pretty sure its not dat cos its gettin power to fuel pump.

Relay sounds better but which ive got 3- 4 of em how do u now which one it is. (is it under the bonnet or dash where the steering wheel is)

And i know the starter motor works ive tried everythin u said lucus
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

I had the same problem a while back. Ended up being a relay . My rangey is a 81 , and the relay was mounted on the firewall on the passenger side.
Hope that helps.
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Posts: 177
Joined: Fri Dec 19, 2003 11:49 am
Location: Perth WA

Post by Lucus »

easiet way to find a dud relay is to start swapping them out until the car starts but another function fails.

Also use the ol' sniffer and smell them, you can usually smell if they are cooked.

Sounds like you know how to drive a mulitmeter, take each relay out 1 at a time and check the between the 85 and 86 terminals for power when you turn the key to start.

You can also put a jumper wire between the 30 and 87 terminal as see if that makes the car crank.

The terminals are numbered on the bottom or the side of the relay so you can see which is which.

good luck :D
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

[quote="Lucus"]wat wif das sms ritin? its hrd 2 reed.

quote]

:rofl: :armsup:

Yea, relay on the passenger side firewall is the most likely culprit
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

i think it is ill go to a car place tomorrow and get one hopefully thats it
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

I had a similar problem.

One of the legs had broken off the relay, but occassionally made contact.

It looked fine and would usually start but other times no go.

I pulled the starter more times than I cared to think about before finding it.

Try listening for the solenoid to click. No click no power from the switch. The solenoid is around 5o x 25 x 35mm and is above the passengers side head.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

Well i know now its not the relay cos i did a few tests with jumping 30 to 87 and it did nothin so should i look at the ignition barrel could that be it lyk an earth wire or somthin lyk that. But im gonna have a look soon see if i can see anythin.
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 60
Joined: Mon Nov 20, 2006 1:55 pm
Location: mornington peninsula

Post by oops »

by the sounds of your post it sounds like the solenoid isn't clicking in. I had/have exactly the same problem on my rr. I found it to be a bad connection on the 12V that leads to the started. . my loose connection wasn't on the connector from the wire to the body of te starter, but about halfway there were two connectors under the trans which were full of crap. if itsnot that try hooking up 12V straight to the starterto test the starter, or on the steering column take out that thing on the left side that the key ignition, try turning that with a screwdriver.
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

Hey everyone thanx for the help but it was the relay.

I was lookin at the wrong one right from the start i have two on the passenger side one that controls the fuel pump and that was the one i looked at.

Anyway get to the point there was the original one still on there and it was covered by aircon hoses (it looked lyk smthin out of the 1960s lol) so i didnt reckonise it so yeh all fixed :D :D :armsup:
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 177
Joined: Fri Dec 19, 2003 11:49 am
Location: Perth WA

Post by Lucus »

Congrats mate. Well dont on fixing it yourself!! :D

Luke
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest