Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hi Pinion in Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 11
Joined: Wed Jan 10, 2007 6:23 pm
Location: brisbane

Hi Pinion in Hilux

Post by jlux3012 »

Hey guys, I have aquired a 80 series Hi pinion front diff centre and want to put it into my 92 solid axle hilux, are they a straight swap over and will I be able to use my lockrite locker.
Also are the 80 series rears a Hi Pinion as well and can the same be done??
Top
Posts: 361
Joined: Sat Mar 06, 2004 11:09 pm
Location: Western Australia

Contact:
Contact toyrex

Re: Hi Pinion in Hilux

Post by toyrex »

jlux3012 wrote:Hey guys, I have aquired a 80 series Hi pinion front diff centre and want to put it into my 92 solid axle hilux, are they a straight swap over and will I be able to use my lockrite locker.
Also are the 80 series rears a Hi Pinion as well and can the same be done??
The hi pinion is a straight bolt into your 92 solid axle , 80 series is a 4.1 ratio
Your 92 Hilux ratio should have 4.3 diesel or 4.875 petrol unless you have already done a ratio change
Adrian
www.chevtorque.com.au
Top
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Post by Trusa »

Toyrex is right, the ratios will differ although it will bolt straight in. The 80 series rear is a larger centre and will not fit the hilux.
Top
Posts: 11
Joined: Wed Jan 10, 2007 6:23 pm
Location: brisbane

Post by jlux3012 »

Could I be lucky enough that the ring and pinion gear set from my hilux centre fit the 80 series centre, can anyone tell me this.
Top
Posts: 26
Joined: Tue Aug 23, 2005 8:44 pm

hi pinion

Post by Stulux »

no the gears can't be swaped from low to high pinion as the high pinion has reverse cut gears. I think Bunderra has 4.3 high pinion gears
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

79 series aswell
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests