Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nut size

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 186
Joined: Thu Sep 28, 2006 6:38 am
Location: Brisbane (Under ya mums bed)

Nut size

Post by Boltaction Billy »

Hi guys just a real quick question and some of you lot will think that this is a shit one but all i want to know is. What size is the big nut behind my gqs hub.
Silent Souls Leave 30 cal Holes
Top
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

53mm
Top
Posts: 300
Joined: Sun May 20, 2007 2:22 am
Location: Toowoomba QLD

Post by 90Mav »

for the price of a 53mm socket, you can swap the nuts for the GU setup, which is a lot better, has 1 nut and a locking plate which screws to the nut.. wont undo on LH side ect. you have to take the sleve that the hub goes over out of the disk, to fit them on a gq. i replaced mine after fitment, have heard some ppl leave them out.
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

my left is bigger than my right...


























oh shite, sorry, read that wrong :P
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

the proper socket is only $20, it wont undo if you know how to use the washers properly......or you could upgrade.

If your too lazy to go buy one you could always get it delivred....

http://cgi.ebay.com.au/Hub-Socket-Toyot ... dZViewItem
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 300
Joined: Sun May 20, 2007 2:22 am
Location: Toowoomba QLD

Post by 90Mav »

plus the bother of getting new washers all the time.. only paid $45 for the conversion... reckon its well worth it.
Thrashed '90 Leaf spring Maverick ute, TD42, 2" EFS lift. 36 Swampers.
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

I keep em in stock so i cant say it really worries me, but if you like you can spend $45 as opposed to $3.50...im tight and will stick to the original setup on my own car and customers cars unless they specify otherwise lol
My bitch has boost, Nutter Engineering Turbo GQ
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 89 guests