Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff ratios

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 107
Joined: Sun Apr 09, 2006 10:03 am
Location: europe

diff ratios

Post by Rampage »

hey guys, currently running standard gearing of a 4.2 TD wagon with 6" lift and 36 pedes and want to get the gearing back to standard! am i correct in saying that 4.6's would be the go and that would put me somewere in the ball part!

also who makes strong gear sets and what is the highest ratio that someone makes 4.8's maybe???

cheers
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

you can 4.6:1 which is slight lower than standard of 4.3:1 if you want slightly higher. I have 4.6s in mine on 35's and it revs a touch to high for my liking. next time i would go 4.3s and if low range isn't enough change the transfer gears.
Don't go the aftermarket gears. i smashed 2 sets of rears in 18 months :bad-words: and that wasn't been too hard on them. both failed on road not the dirt and hadn't been offroad for a while before hand
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 107
Joined: Sun Apr 09, 2006 10:03 am
Location: europe

Post by Rampage »

thanx mate, think ill go with 4.6s then as i will be running 37-38s! were did you get your ratios from! i heard that you should get geniune ones but just wondering if there was a cheaper place out there that can get them!

cheers
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

I got them thru a 4wd shop thru G and J i think it was in SA. the genuine ones are about double the price
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Rampage wrote:thanx mate, think ill go with 4.6s then as i will be running 37-38s! were did you get your ratios from! i heard that you should get geniune ones but just wondering if there was a cheaper place out there that can get them!
if your running that big a tire, go genuine gears, will save you bux in long term.
Posts: 77
Joined: Thu Sep 27, 2007 7:11 pm
Location: in shitsville

Post by REVNGQ »

X2 GENUINE ARE THE GO... :armsup: :armsup: I VE BROKEN A 4.6 G&J PINON GEAR IN HALF BEFOR :cry: :cry: :cry: NOY BAD FOR A STOCK 4.2TB
GQ UTE
35 SIMEX

www.jpc.com.au
www.flaminfabrications.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests