Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

200rwkw td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

oh by the way heathgu's motor ur talking about went pop some time ago ;)
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

eliteforce32 wrote:oh by the way heathgu's motor ur talking about went pop some time ago ;)
but wasnt that a faulty methanol injector that stuck open pumping it in flat out?
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

You can make about 2000+hp if you want, speak to the tractor pull guys, whats your budget and what do you want to spend?

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

bogged wrote:
eliteforce32 wrote:oh by the way heathgu's motor ur talking about went pop some time ago ;)
but wasnt that a faulty methanol injector that stuck open pumping it in flat out?
yep...

heres a bit of a right up with heaths truck. before methanol was introduced....

http://www.are.com.au/Inter/air_to_water.htm (bout half way down)


cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

yes it was, but thats apart of getting 230+kw from a TD42..... maybe to the extreme end of the spectrum ;) of motors
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Heres a graph just to show it can be done.

Image





Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 23
Joined: Sat Oct 27, 2007 3:30 pm
Location: narre warren

Post by tomahawkracefab »

what are the engine revs???
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

I dont know, Ill have to look at a derived rev setup to see if we have it. The range would be roughly 1500rpm to 4500.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

the patrol from the dyno sheet had 4.6 diff gears and 35's. it made max power at 94 kms which is about 2600 - 2700 rpm. max torque was at 84 kms which is about 2100 - 2200 rpm. dyno was run in 4 th gear.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Hi Al,

I hoped you might pipe up with that info. The vehicle was detuned from that state as exhaust temps and smoke were too high, but it goes to show that it can be done.

The secret is making them hold together.


Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

hey andy
ill have to see you soon to do some more work on my car. to make that sort of hp its all about flow.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

w3edtgolyuikjyhtgfrerdtgyuol.,kmnbfgrvdm, ./



Oops, sorry guys. Just had to wipe the drool off the keyboard.... :shock:
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

cuthill wrote:with 25 psi my motor still revs to 6500 rpm. motor still going after 4 years and dosen't burn a drop of oil
i wanna see some video of the tacho and of this thing moving

and some dyno sheets
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

[quote]i wanna see some video of the tacho and of this thing moving

as for video of the tacho i cant do but if you dont believe me ask my navi. and for video check obc 06 dvd sand stages, blue ute.
and dyno sheets thats for me to know and you to find out lol.
Al
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

The little mule puts out 146 RWKW on 37's with 4.6's.
It's a simple turbo, not big arse, pump mods and an FMI.
What i don't like about 200kw cars is they seem to come on later and your throttle control is reduced. The mule has 3/4 of its power from about 1500rpm.
If you want to drive it to feel 146RWKW or want to discuss soome options then PM me
Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

cuthill wrote:
i wanna see some video of the tacho and of this thing moving

as for video of the tacho i cant do but if you dont believe me ask my navi. and for video check obc 06 dvd sand stages, blue ute.
and dyno sheets thats for me to know and you to find out lol.
Al
or ask me iv seen it go on the road and heard it coming. revs hard and goes extremely well :armsup:
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Posts: 82
Joined: Mon Jan 19, 2004 6:01 am
Location: Santiago-Chile-south america

Post by pato castro »

Diesel performance is something that interest me a lot, specially when you see what american do to their engines, look this Dodge truck:

http://www.youtube.com/watch?v=3vU5F7mLLAQ

http://www.youtube.com/watch?v=-P3L6a0e2Ow&NR=1

1200 hp out of a 5.9 6 cylinder diesel engine? w o w . . .
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

HOLY F*%CKING CRAP!!!! Thats insane!!! See the thing nearly roll over sideways on the dyno!!!

There's another video of it doing a 10.something quarter mile. Doesn't even sound like its revving! Only in America hey.....
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

That is out of control! Holy F%$#ing S&$t. I want one!
97 4x4 hilux
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

google "compound turbo"

some interesting stuff comes up :cool:
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

AND WHEN 1200HP DIESELS GO WRONG:

http://www.youtube.com/watch?v=wKekPasYOlI&NR=1

Its incredible how they take 10 seconds to go from 700RPM to 2500RPM (exaggerated), and the last 2500RPM is over in about half a second. Imagine actually driving something like that around town...... :D

And this fella just used as much diesel in 100 metres as i what i would have used over 100km!!!

http://www.youtube.com/watch?v=AYaU1v1V ... re=related
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

GQII Patrol YAY!!
Posts: 335
Joined: Mon Oct 10, 2005 10:33 pm
Location: newcastle

Post by xenith »

my next build is a compound turbo set up. my old girl has been on 25 psi and has been hiting 6000+rpm for 3 years 480 k on the clock and still going strong std bottom end. the last one i built for hammey on here is pulling 20+ psi with meth and a fue other things i have come up with over 4 years of resurch go's hard comes on quick has good top end . it acutely has a rebuilt steel wheeled high flowed old turbo of mine on it one i blew in the early days as it says on my advar it will go or it will blow still no blow :twisted:
it will go or it will blow
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

Can i be rude xenith and ask for a bit of your working history (where you've worked at, doing what etc etc)??
Posts: 335
Joined: Mon Oct 10, 2005 10:33 pm
Location: newcastle

Post by xenith »

every thing mate started on cars in dealer ship , went nrma , trans rebuilding ,went forklift fixing, mine car building, fire truck building, out of town 4wd for a while now into truck repairs mate have lots of tickets eg MRIVC, LPG fitter and system manufacturing , a/c repair and system manufacturing, etc y mate. But never learnt to spell :roll: been racing things since i was able to ride a bike
it will go or it will blow
Posts: 105
Joined: Sun Nov 18, 2007 7:12 pm
Location: Dont no

Post by msjc38 »

PGS
I have estimated ican do pump & injrctors for around 3000. 2 or so for a turbo another 2000 for a custom intercooler. So with misc items added on i will add another 2000 hopfuly im in the ball park i will fit everything myself so that wiil save some$$$$
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

Has anyone ever seen a stroked out TD42?? Would it be worth it??
97 4x4 hilux
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests