Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diff question
Moderator: Tiny
diff question
how deep do the oil seals have to go in the front diff there is no edge on wich they stop who can help me
dont know
dont care
dont give a damn
and thats gonna be on the side of my car
dont care
dont give a damn
and thats gonna be on the side of my car
Manus,
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
Manus,
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
For what model Daihatsu is this for? Is it the pinion shaft seal? My `91 service manual says to drive the new seal to the edge surface using special service tool 09517-87601-000. This tool looks like a piece of pipe of the same diameter as the seal. Maybe a large socket would work. Just drive it STRAIGHT in to the edge surface.
Hope that this helps...if not we need more information.
Who is online
Users browsing this forum: No registered users and 8 guests