I'll give it one more go & then shoot myself. ( I need a drivers side un-rusted door with winding window the type without a quarter window...for a 1974 BJ40 short wheelbase Landcruiser ) Cheers Dennis
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1974 Model BJ40 Driver side door
Moderators: toaddog, Elmo, DUDELUX
1974 Model BJ40 Driver side door
Hi, I thought I posted this Question on the 27th but I cant see it anywhere. I'm a new user...so that probably explains everything.
I'll give it one more go & then shoot myself. ( I need a drivers side un-rusted door with winding window the type without a quarter window...for a 1974 BJ40 short wheelbase Landcruiser ) Cheers Dennis
I'll give it one more go & then shoot myself. ( I need a drivers side un-rusted door with winding window the type without a quarter window...for a 1974 BJ40 short wheelbase Landcruiser ) Cheers Dennis
hey mate i got the window an all the winding stuff here. doors rusted though...
if you have no luck finding a door and the lower part of yours is rusted (as they usualy are) rare spares do the full lower part of the door. i think its the bottom 6inches or so.
just cut yours off and weld the new one on! easy! just remember to lay a wet rag over the door so the skin wont warp
https://rsp-secure.com/rarespares/
just select toyota, then landcruiser and its right down the bottom of the page
if you have no luck finding a door and the lower part of yours is rusted (as they usualy are) rare spares do the full lower part of the door. i think its the bottom 6inches or so.
just cut yours off and weld the new one on! easy! just remember to lay a wet rag over the door so the skin wont warp
https://rsp-secure.com/rarespares/
just select toyota, then landcruiser and its right down the bottom of the page
BJ40 Door
Hi, Thankyou for your offer...but I shoud have said that I already had all the bits that go with the door. I will contact rare spares as you suggest & see how I go getting the lower section & also thankyou for the welding tip.
Cheers Dennis
Cheers Dennis
Who is online
Users browsing this forum: No registered users and 2 guests