Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2h motor question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

2h motor question

Post by matthewK »

what oil pressure gauge should be used? i use an 80psi and busted it

maybe 100?
1995 land rover disco on 265 muddies
Top
Posts: 110
Joined: Tue Aug 15, 2006 7:57 pm
Location: Newcastle

Post by nads »

the fsm says oil pressure should be 36 to 85 psi at 3000rpm. (and at least 4.3 at idle)

High oil pressure is common in a 2h caused by the relief valve sticking. That could be your problem.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests