Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drop Boxes or Castor bushes for 4 inch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Drop Boxes or Castor bushes for 4 inch

Post by GUEEY »

Hi.

Currently setting my truck up for a 4 inch lift.
i currently have no castor correction and with the new lift i want to fix the castor correctly.
is it worth the extra money for drop boxes For 4 inch!
or do i run castor bushes.
i like the idea of drop boxes but am unshore whether it is worth the $$$$

Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

not even a desicion buddy..drob boxes all the way. would never use anything else for castor corrrection
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

i currently use 2 inch castor bushes on my 4 inch lift. i took out my castor plates as it was WAY to much castor for the lift.

only problem i have now is that the mushroom bushes keep tearing on biggish hits...... alot less than it took with boxes
turbos are nice but i'd rather be blown
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Go the drop boxes
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 282
Joined: Sun Dec 24, 2006 5:10 am
Location: Lawnton,Brisbane.

Post by simcoz »

Drop arms are better again but cost more.
Corey & Simone
Team Cozamatic Racing
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

simcoz wrote:Drop arms are better again but cost more.
Coz ,to clarify what you said it depends on what the truck is used for as drop radius arms are good for just competition and ground clearance but the boxes will drive better on and off road than any other caster correction as they drop the rear of the radius arm down to the same specs as a factory nissan has , this will then support the diff properly over bumps. The important factor is the height difference from an imaginary horizontal line from the centre of the diff to the centre point of the rear pin
Drop arms will give you only a marginally better ride than caster plates and this is only because they have relieved the rear bushes of stress, the rear mounting point is still to high up above the diff centre line to give proper support of the diff.
To answer the original question that was posted the drop boxes are so much better than bushes, save your money buy boxes and you will have a nice driving truck.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 155
Joined: Mon Jun 27, 2005 3:06 pm
Location: Birdwood, Adelaide Hills

Post by oondy »

IMO its up the perception of the driver as to which drives better on road. I think my GQ with 4" lift and drop arms is much better to drive than when it only had 2" lift and no caster correction, not just the steering aspect but the whole hitting bumps and wot not, its fine, the front diff just compresses the coils and away we go, no harshness at all realy.

My mate in his GU Ute with 4" lift and drop boxes says it drives crap. if you want drop boxes then get them, if you want arms, then get arms. personal preference really.

cheers

OONDY
BIG O 4X4 - 4WD SUSPENSION AND ACCESSORIES.
PH: 0438 870 856 EMAIL: sales@bigo4x4.com.au WEB: www.bigo4x4.com.au
Internet Specials: 2" Kits from $690 Patrol 3-6" kits from $2000
Posts: 43
Joined: Tue Mar 13, 2007 7:29 pm
Location: Melbourne

Post by santaz351 »

How are drop boxes fixed to the chassis?
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

santaz351 wrote:How are drop boxes fixed to the chassis?
From the ones I have seen. They bolt onto the four bolts that hold the gearbox crossmember (so it gets lowered by 8-10mm). And thru the factory rear mount for the radius arm.
THOUGHT FOR THE DAY....
Posts: 43
Joined: Tue Mar 13, 2007 7:29 pm
Location: Melbourne

Post by santaz351 »

so is it just a matter of preference which way people go. I'm about to give my gq a 4" lift and i'm confused/unsure which way to go, drop boxes or radius arms.

cheers
Posts: 480
Joined: Thu Jan 30, 2003 4:22 pm
Location: New Zealand

Post by KIWI »

I'd go for drop boxes, although if you want good wheel travel wheel too, I'd go for the Superior arms
Posts: 618
Joined: Tue Jan 16, 2007 2:16 pm
Location: Casino N.S.W.

Post by Rogue Patrol »

I used to use castor plates then changed to Drop boxes and have never used drop arms.

The biggest reason I like the boxes is the way the car 'mounts' obstacles.

The greater the angle from the front axle to where it's mounted at the chassis the harder ir will be to drive up onto something.....
The flatter this imaginary line that Mick spoke of is the more easily the car will drive up onto something.

The only thing you lose by using drop boxes is a little bit of clearance at the gearbox crossmember.
I've heard stories of guys getting hung up on drop boxes but never seen it and it's never happened to me.
AND if you want to use the Superior arms then you need only buy one.
6" GQ, 37" Treps, that is all.....



You have the right to remain silent,
anything you say can and WILL be held against you on outers.....
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

when I was running drop boxes I would always get hung up on them, winch trucks are different cos they just drive til their stuck n winch.
biggest problem with drop boxes is you (I did) will hit the arms on rocks, then drag the arm over the rocks, then if it slides over the rock it will jam its self on the box if you need to reverse.

I had the same problem with the bolt in 5 link.

I have had caster plates, caster bushes, 5 link, 4 and 6 inch drop boxes, drop arms with 4 and 7 inch lifts.

I would recomend arms, but between bushes and boxes go the boxes.
Posts: 295
Joined: Sun Sep 24, 2006 5:34 pm

Post by azzad »

simcoz wrote:Drop arms are better again but cost more.
Depends on what arms you use, I have had both bushes and arms, drop arms win hands down.

I agree with what has been said about drop boxes returning everything back to normal but I think I would still use drop arms, just because I dont think I would notice the differance in ride between the 2 but probablly would notice the reduced clearance.

Just my opinion.

Dazza

pm me for details on good quality, affordable drop arms
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

I have used drop boxes for 4 years and never hung up on them. They are the go as they get the radius arm horizontal that means when you hit obstacles the arm goes up and back not up and forward, and it centralizes the rear pin in the bush(better for articulation and the life of the bushes. Drop arms would acheive the same but I can make drop boxes cheaper than buying arms.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

All well and good, but once you start going over 4" lift you push the panhard and steering angles seriously out of whack.

Don't think anyone has really addressed this problem yet as it requires chassis modifications and steering mods.
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

Yom wrote:All well and good, but once you start going over 4" lift you push the panhard and steering angles seriously out of whack.

Don't think anyone has really addressed this problem yet as it requires chassis modifications and steering mods.
I have fitted Tuff Dog ajustable panhard rods, cheezy supplied me a adjustable drag link.
all my alignments are now spot on, just what to get the castor right!
i dont like the 3 deg bushes, there is bugger all material between the eye and the steel sleave.
Thanks for everyones comments.
i am booked in next week for Drop Boxes.

Cheers

Grant
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Posts: 1152
Joined: Mon Sep 25, 2006 8:25 pm
Location: the most livable planet in the universe

Post by its aford not a nissan »

GU slotted bushes help alot with flex

just thought i would add that :D
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests