Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I need to get my car roadworthy and the horn isn't connected (red airhorn, is that the standard one?). The service manual doesn't have any details on the horn either. Does anyone have pictures or a description on how the horn connects, or where the wire is located on the loom so i can steal a horn from my other car.
This may or may not help my car is a Maruti not a Sierra so it may be different, but in the pic towards the bottom left corner, you can see 2 wire green and blue, they go to the horn (IIRC) they should come out of the loom that goes to the headlight (IIRC)
If you follow the wires from the back of the right headlights they go down to a loom (buch of wires taped up). There will be 2 other wires coming out with a flat, female terminal on the end with clear rubber sheathing. They are the horn wires. If you need colors let me know and I'll run back out to have a look.
I just went and had a look. Found 2 spare wires but one was a constant voltage and the other did nothing. Could you please get colours or a picture for me because i don't understand how the terminal attaches to the horn either, i may be missing a piece.
Ah i see, the horn i took of my other car to test with grounds to the chassis. I don't understand how the two female connectors plug onto the horn then, i must be missing something?
Ok it seems the wire from the steering wheel is broken somewhere along its path so i bought a new horn, ran a new wire from the steering wheel and it's all good now.
