Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ diffs

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

MQ diffs

Post by Guy »

How wide are MQ diffs .. WMS to WMS .. ???
What models had whatr gears in em (I belive the 2.8 petrols had 4.8's in em) and how much woud I be looking at for a set (no lockers etc)

I want to put em under my Zuk along with my 35 claws .. and seeing as I am selling my GU . I want the best of both worlds .. Zuks lightweight .. and nissan toughness :D
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

not sure, but i think the ratios are: 4.625 : 1
4.3 : 1
4.1 : 1

not sure which models which, but the petrol 85' models have the 4.6's.

I have quite a few front and rear centres and housings spare that are 4.6:1 if your interested..... Going cheap

HTH

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Screwy_ScrewBall wrote:not sure, but i think the ratios are: 4.625 : 1
4.3 : 1
4.1 : 1

not sure which models which, but the petrol 85' models have the 4.6's.

I have quite a few front and rear centres and housings spare that are 4.6:1 if your interested..... Going cheap

HTH

Screwy


Does that mean complete- discs included front and drums on the back ones?
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

I have a coulpa drum to drum rears,
have a coupla CV to CV fronts, no disks
are all 4.6:1


Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I could check the width for you tonight if that helps.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

diff ratios

Post by DR Frankenstine »

4.0 are 4.1:1
2.8 are 4.625:1
3.3 diesel are 4.625:1
3.3 turbo diesel are 4.8:1
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

I am pretty sure that 3.3Turbo runs a 4.3 centre not a 4.8 centre
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

diff ratios

Post by DR Frankenstine »

jtraf wrote:I am pretty sure that 3.3Turbo runs a 4.3 centre not a 4.8 centre
I hope youre right! ill double check on that so i can change to 4.6
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests