So will any bull bars fit across the range or are they all model specific?
i got a 01 single cab, wondering if a bar and sides from a late 90's will fit
straight up?
minor modifications?
no chance?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux bullbar interchangeability
Moderators: toaddog, Elmo, DUDELUX
The mounts aren't overly an issue, you can modify them.
In saying that, your model hilux is wider then an earlier model in the body. An earlier model bar will sit in under the sides nearly 2" or so. They are also fairly flat across the front, where as the later model curves forward in the center of the grill. With that the center upright sections will probably hit the grill and if you bring it forward to clear will see the side sections not lining up with the curve of the guard, also would leave a large gap underneath the headlight area.
You could make it fit, but it's not going to be a very neat fit and will need to do some surgery to make it neat. Be easier just to hang out for a later model bar.
For those earlier guesses, Hiluxs started to get IFS in 1988
In saying that, your model hilux is wider then an earlier model in the body. An earlier model bar will sit in under the sides nearly 2" or so. They are also fairly flat across the front, where as the later model curves forward in the center of the grill. With that the center upright sections will probably hit the grill and if you bring it forward to clear will see the side sections not lining up with the curve of the guard, also would leave a large gap underneath the headlight area.
You could make it fit, but it's not going to be a very neat fit and will need to do some surgery to make it neat. Be easier just to hang out for a later model bar.
For those earlier guesses, Hiluxs started to get IFS in 1988
If God did not intend for us to eat animals, then why did he make them out of meat?
Who is online
Users browsing this forum: No registered users and 0 guests