Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

another over heating rover what a surprise

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

another over heating rover what a surprise

Post by rusty_042 »

hey all just had our first test run in warbodon an we got some really good info back on things we need to do

mainly suspension additions an electrical but the hole day the car was over heating basicly every 10 min it would be redline heat wise
i have had problem with it since new but mainly at the start it ws due to just runnin water only.

since then i have pulled it out cleaned it an pulled all the dead birds out refitted with vt v8 twin thermos running nulong concentrate about 6ltrs rest was distiled water

the thermo were running constant but stillit kept boiling
it does look like its leaking out of the side tank but still there is alot of fluid in there any ideas what could cause this?
5LTR Rangie
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

What engine? Timing? fuel mixture?
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Your bottom rad hose wire reinforced?

Wat da frk u mean clned it?

Was the radiator rodded out, tanks off etc?

Or you just hosed it and thats it?
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

sorry 88 highline 3.5 efi standard set up
no timing changes or anything

cleanded as in pulled out cleaned out all crap inside out not ptofecional but spent a fir bit making sure there was nothing in there as it was fairly clogged rust wise

the tank seems to be leaking uot of the join to the fins an there standard hoses i ahvent changed them yet
5LTR Rangie
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

rusty_042 wrote:sorry 88 highline 3.5 efi standard set up
no timing changes or anything

cleanded as in pulled out cleaned out all crap inside out not ptofecional but spent a fir bit making sure there was nothing in there as it was fairly clogged rust wise

the tank seems to be leaking uot of the join to the fins an there standard hoses i ahvent changed them yet
Oh, thought you had a 308? ignore the hose bit then, need to get the radiator cleaned properly if it was full of crap, or atleast another one, replace the thermostat, then try again ;) Edit, ahhh, thermos :D

Does it overheat all the time, only slow? only fast?

Proof read your post before hitting the button to, please :?
Last edited by cloughy on Mon Mar 17, 2008 8:34 pm, edited 1 time in total.
Wanted: Car trailer or beaver tail truck, let me know what you got
User avatar
DK
Posts: 527
Joined: Fri Oct 20, 2006 6:00 pm
Location: Melbourne

Post by DK »

Thermos' running the right way?
Checked Thermostat?

Get the rad professionally cleaned you wouldnt believe the amount of shit they find even in a a well looked after cooling system
3dr 110 H/Top,Swampers,Locked and Loaded
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

yer all the time low range slow fast high range slow fast can do 100kms an still will over heat

the thermo are on all the time as we had to do a side of road fix so there direct power via switch not contoled by temp hence on all the time

sorry guys my post seemd to make sence b4 posting
5LTR Rangie
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

rusty_042 wrote:yer all the time, low range, slow, fast, high range, slow, fast, can do 100kms an still will over heat

the thermo are on all the time, as we had to do a side of the? road fix, so they're direct power via switch, not contoled by temp, hence on all the time

sorry guys my post seemd to make sence b4 posting
Sorry to be a prick, but TXT SMS shit is a pain in the arse to read :D

Sounds like stuck thermostat

That's still hard to read, you got this shit in English for us? :armsup:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

Hey i got the same problem only wen its hot lyk a 38-40 degree day. My mate (owns 2 rangies rebuilt em frm the ground up) Sez its gotta be the radiator so get it rodded which i still have to do (only costs $80) Gonna do it soon wen i have money lol :cry: . It also can be the waterpump but very rare they will cause a problem.
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

ha thats close enuf i am on the computer all day so im not ust to getting corrected

i will check / replace the thermostat an check the water pump as anything could be causing it, we did have to grind off the viscus fan as that siezed up! would that cause it to fuk up?
5LTR Rangie
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

rusty_042 wrote:ha thats close enuf i am on the computer all day so im not ust to getting corrected

i will check / replace the thermostat an check the water pump as anything could be causing it, we did have to grind off the viscus fan as that siezed up! would that cause it to fuk up?
No, siezed fan would just be pulling air all the time

On a Computer all day, but u rite lik 4 retrd?? :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

yer the fan blades were broken hense grinding off
an yer like a retard as i speak with geeks all day
5LTR Rangie
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

I thought Geeks were really smart and their words were completely legible despite being completely unheard of.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

not the ones who i talk to
5LTR Rangie
Posts: 166
Joined: Tue Sep 28, 2004 8:12 pm

Post by disco95 »

Get your radiator rodded. Do the job properly. You'll be surprised.
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

yeah so what happened to the 308, i thought it was aswell :?
Damien


--------------------------------------------------------
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

haha baby on the way an here were 2 many cost with getting teh 308 engerniered an registed to i just got a 4door registerd an swap all mods across

i have the old 2 door with the 308 here but also have a 4 door with a 304 that im gonn astrip so im gona sell the old one an hopfully thatll cover most of the engerniers certificates plus 4door looks so much beter lol
5LTR Rangie
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

[/quote]On a Computer all day, but u rite lik 4 retrd?? :D[/quote]

Now thats funny :D .
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 234
Joined: Sun Jan 21, 2007 2:42 pm
Location: bayswater vic

Post by rusty_042 »

this is my new one on trial day

Image

sorry about the rez this comps dont have paint for some reason
5LTR Rangie
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests