Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

So I bought a Haflinger

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

So I bought a Haflinger

Post by mattc »

Have liked one for a while.... factory portals and diff locks, no low range but 1st gear crawler of about 65:1.

Image
This is the long wheel base model (180cm)

A few fix-it tasks like brakes before I can take it for a proper test drive and then a complete resto.

cheers
MattC
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

:shock: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool: :cool:
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Very Cool :cool:

I take it this was the one on eBay recently?
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

Yes. One of the ebay ones last month... this guy near Bungendore sold two. My one and the bug-eyed one below...

Image
Some guy from Italy (some people are keen) was bidding on that one but he missed out to someone in Sydney.
There was another one in pieces near Port Macquarie listed at the same time.
Hadn't seen any on ebay etc for a couple of years. Cheers.
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Speed machine!

I think they have a top speed of about 50Kph.

Is that correct?
I'm the sharpest tool in the shed!
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Fawesome. :cool:
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Re: So I bought a Haflinger

Post by v6hilux »

mattc wrote:Image
Now I want one too!
I'm the sharpest tool in the shed!
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

It's like a baby unimog :lol:
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

Gonzo wrote:It's like a baby unimog :lol:
its actualy a baby pinzguer :D
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

macca81 wrote:
Gonzo wrote:It's like a baby unimog :lol:
its actualy a baby pinzguer :D
Which is like a baby unimog :rofl:
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

Yeah top speed 55km/h in 5th!

Been wondering what offroad tyres I can get for a skinny 12" rim.....

Someone else has discovered 5.70-12 bobcat tyres!
Image
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

mattc wrote:Someone else has discovered 5.70-12 bobcat tyres!
Image
Those look like excellent tyres and the sidewalls would be very tough!
I'm the sharpest tool in the shed!
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

it looks like its got a boat :lol:

I'm jealous :oops:
[color=green]Vote Earth[/color]
Posts: 1780
Joined: Wed Oct 05, 2005 6:43 pm
Location: Toowoomba, QLD

Post by midget_nick »

Very nice, you could fit a fair bit of shit in the back too.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

There was a documentary probably 18 years ago called "Call of the wild" where 2 blokes had a nice big catamaran and a haflinger and toured up through the cape and to thursday island. They too fitted bobcat tyres and had difflocks, it was awesome.

Its the best doco i have ever seen but i cant find it anywhere.... http://www.afc.gov.au/filmsandawards/fi ... +Adventure
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

That would be an interesting doco to find.

I did find even Dr Who drove a haflinger but not sure about those funky headlights :shock: :)

http://picasaweb.google.com/pureredcord ... 8561281314
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Post by xr393 »

mattc wrote:Yeah top speed 55km/h in 5th!

Been wondering what offroad tyres I can get for a skinny 12" rim.....

Someone else has discovered 5.70-12 bobcat tyres!
Image
I use to have one years ago and the top speed was 48 mph on the plate inside the cab, apparently there were two different ratio's for them and also if your chasing some rims of memory i used fiat 124 or around that era as they have the same stud pattern. I hope you enjoy your new toy i know i did.
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

Hi mate,

Sweet ride, they are all over the place in europe still. They are widely used on the farms and nurseries etc. Got some pics will try to post them.

Good luck

Sadiq
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Posts: 44
Joined: Tue Jan 25, 2005 5:26 pm
Location: Healesville

Post by 360rangie »

There was a documentary probably 18 years ago called "Call of the wild" where 2 blokes had a nice big catamaran and a haflinger and toured up through the cape and to thursday island. They too fitted bobcat tyres and had difflocks, it was awesome.

Its the best doco i have ever seen but i cant find it anywhere....
WAS THAT WITH aLBY mANGEL AND ONE OF HIS MATES. Who knows? I think I remember them using a duck punt too to carry it over some deep and rough water and then when on the hard stuff put the punt on the rof of the haff.
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

Hi mate,

Thats the one i remember alby and his crazy mate! good viewing!

:)

sadiq
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Re: So I bought a Haflinger

Post by j-top paj »

mattc wrote:Have liked one for a while.... factory portals and diff locks, no low range but 1st gear crawler of about 65:1.

Image
This is the long wheel base model (180cm)

A few fix-it tasks like brakes before I can take it for a proper test drive and then a complete resto.

cheers
MattC
how much that set you back?
looks :cool:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

360rangie wrote:
There was a documentary probably 18 years ago called "Call of the wild" where 2 blokes had a nice big catamaran and a haflinger and toured up through the cape and to thursday island. They too fitted bobcat tyres and had difflocks, it was awesome.

Its the best doco i have ever seen but i cant find it anywhere....
WAS THAT WITH aLBY mANGEL AND ONE OF HIS MATES. Who knows? I think I remember them using a duck punt too to carry it over some deep and rough water and then when on the hard stuff put the punt on the rof of the haff.
Not sure if it was Alby Mangel.... but sounds like we are talking about the same Doco... cant find a torrent for it :'(
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 662
Joined: Thu Jan 23, 2003 8:02 pm
Location: Picton

Post by Tazz »

Anyone see what the ones on ebay went for earlier in the year.

I have one in excellent condition that i'm thinking of selling, but am keen to get an idea of what it's worth before I decide whether to sell it or not....

Cheers,

Tazz
Offroad Performance Warehouse
1300 679 494
www.opw.com.au - tazz@opw.com.au
www.jd2.com.au - tazz@jd2.com.au
Posts: 24
Joined: Mon Nov 27, 2006 5:17 am
Location: nsw

Post by pete_49 »

It wasn;t Alby Mangel It was two blokees from west sydney dont know their names. I believe they went broke after that first Doco Good one tho
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

Can you post a link? Thanks. I can't find them - just the one without an engine starting at $1800
http://cgi.ebay.com.au/Haflinger-Steyr- ... dZViewItem
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Posts: 34
Joined: Thu Aug 24, 2006 9:16 am

Post by bbear »

Hasnt everybody got a Haffy?? :?

I have :cool:

Image

:lol: :lol:
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Saw this on the weekend and thought someone maybe interested in it. The phone number is 0414809673 (Paul)

Image

Image
Posts: 220
Joined: Fri Nov 29, 2002 11:13 pm
Location: Canberra

Post by mattc »

That is a very very good price - the seller could ask heaps more than that......but it is sold already.
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

mattc wrote:That is a very very good price - the seller could ask heaps more than that......but it is sold already.
I didnt think that he would have any problems selling it. As you said the price was very good.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests