Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brake bias valve

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 278
Joined: Sat Sep 27, 2003 4:17 pm
Location: Central Coast NSW

Brake bias valve

Post by big38l »

I have been told by several people to just remove it and run one hard line from the booster to the flex line in the back and stick a bolt where the other line was remove from the booster! I hav heard of people doing this and their rear brakes locking up all the time but I don't think this will be a problem in the 4runner! Has anyone else modded the brake system to the rear of their truck in this way?
85 4SKINNER , totally stock.(Lie ;-) )

Black Chevy Blazer 454 big block , broken diff (True :-( )
Top
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

i would definately talk to an engineer before doing this.

i think you know what the answer will be. :D
innovation is better, better is faster, and fast is all that counts
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests