Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

which gas for a mig doing mild steel

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

which gas for a mig doing mild steel

Post by short stuff »

i use argon but we use co2 at work what do some of you guys use for welding
Top
Posts: 109
Joined: Sat Jul 08, 2006 11:31 am
Location: Rockingham, Western Australia

Post by gorilla »

argonshield home and work

did a lot of searching before I decided

http://www.mig-welding.co.uk/forum/show ... php?t=1061
GQ leafy ute - TD42, 2" lift, parabolics up-front, dove tail tray and 37" IROKs
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

m

Post by sloshy »

I use BOC's argoshield
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Argosheild is the go.

Co2 will do if you have a heater, but argoshield is fine.

Run straight Argon if you already have to save an extra bottle, but any of the Argo/Mig sheilds will do.

Cheers
Top
Posts: 195
Joined: Sat Mar 11, 2006 3:14 pm
Location: central coast nsw

Post by siggie »

ARGONSHIELD good for aluminium as well need diffrent wire
Stik It Signs
Top
Posts: 69
Joined: Sun Feb 24, 2008 3:44 pm
Location: melb.

Post by 60smurf60 »

will check the bottles wednesday when im at work, we use pure argon for alloy, and argon for mild steel. will let u no the % for mild steel. alloy is straight argon, mild steel is a mix i think
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Who here has a D size Argoshield bottle on hire from BOC?

Send me a PM please
I'm the sharpest tool in the shed!
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

v6hilux wrote:Who here has a D size Argoshield bottle on hire from BOC?

Send me a PM please
Hope we're not trying to avoid bottle rent :roll:

There is another way ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

v6hilux wrote:Who here has a D size Argoshield bottle on hire from BOC?

Send me a PM please
Be aware all BOC bottles are now tagged with a bar code. But its not hard to swap the bar code from bottle to bottle. You just need to make sure the account holder allways ends up with there bar code back after you swap them. I do exactly what you are trying to do but with E bottles. Im sorry i cant help you out though.

Bottle rental is a rip off.
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

RUFF wrote:Bottle rental is a rip off.
Yep, specially since it takes me 3 or 4 years to use the gas in 1 bottle.
I'm the sharpest tool in the shed!
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

RUFF wrote: Bottle rental is a rip off.

X billion :bad-words:
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Post by Harb »

Argonshield for Steel in my MIG
Straight argon for alluminium in both my TIG and MIG
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

cloughy wrote:
Hope we're not trying to avoid bottle rent :roll:

There is another way ;)
Care to elaborate? PM if you prefer. :)
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 125
Joined: Sun Jul 08, 2007 7:15 pm
Location: Albury

Post by Nuckingfuts »

Harb wrote:Argonshield for Steel in my MIG
Straight argon for alluminium in both my TIG and MIG
This is correct
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

RUFF wrote:
v6hilux wrote:Who here has a D size Argoshield bottle on hire from BOC?

Send me a PM please
Be aware all BOC bottles are now tagged with a bar code. But its not hard to swap the bar code from bottle to bottle. You just need to make sure the account holder allways ends up with there bar code back after you swap them. I do exactly what you are trying to do but with E bottles. Im sorry i cant help you out though.

Bottle rental is a rip off.
Bar codes :shock: you QLDs have got it rough :roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 16
Joined: Tue Feb 26, 2008 2:59 pm
Location: usa

Contact:
Contact mousee

Post by mousee »

75% argon 25% co2, almost the same thing as your Argoshield...
better to look the fool then to open your mouth and remove all doubt :flippoff:
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

like most, we also use Argoshield.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

gas

Post by KYSI »

Argoshield x2
Top
User avatar
longlux
Subversive Bucolicism
Posts: 9196
Joined: Sat Mar 13, 2004 10:47 pm
Location: I think I hear a Dingo eating your Baby

Contact:
Contact longlux

Post by longlux »

mousee wrote:75% argon 25% co2, almost the same thing as your Argoshield...
I worked for Joyce brothers when I was a young bloke welding hospital beds they used Ar & CO2 mixed.
Workplace Safety :
Destroying our forests one Take 5 at a time.

Every time you do a Take 5 an Orangutan cries.

https://www.facebook.com/shadowthetravelcat" onclick="window.open(this.href);return false;
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

At work used to use pure argon, now they use argoshield, a 50 mix of argon/co2, it's ok, but the co2 causes extra splatter compared to pure argon.
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

RUFF wrote: Be aware all BOC bottles are now tagged with a bar code.
swapped some oxy/acet bottles through my mates business account direct from the supplier and they didn't check any barcode :?
That was a week ago.
They are a BOC dealer.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

sloshy wrote:
RUFF wrote: Be aware all BOC bottles are now tagged with a bar code.
swapped some oxy/acet bottles through my mates business account direct from the supplier and they didn't check any barcode :?
That was a week ago.
They are a BOC dealer.
Thats very odd as they now need to scan all outgoing and incomming bottles to an account.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 117 guests