Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Bar mounting? Anyone?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Rear Bar mounting? Anyone?

Post by subaman »

Hey guys just making a rear bar for my rrc but am finding it hard to get my head around mounting it. I have a wheel carrier on it and the rangie has a 2 inch body lift. The chasis looks real thin and I have a factory haymen reece towbar I want to keep on it. So am trying to get a few pics from other rangies to work out a strong mounting system. Any help would be much appricated. cheers shaneo
gas grass or arse no one rides for free
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

anyone got any sugestions?
gas grass or arse no one rides for free
Top
Posts: 22
Joined: Sun Jun 18, 2006 12:07 am
Location: Seaford, Victoria

Post by waxen »

Where abouts are you? I have a couple of rear bars to look at.
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

I am in brissy just need a few mounting Idea's got the bar sorted just not sure of best spot to mount to chassis. Cheers shane
gas grass or arse no one rides for free
Top
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

Why not just drill through the chassis and put in some crush tubes. Then you can make up plates any size and shape you want.
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Here is mine before bar and hayman reece install

Image

And here it is after cheesy bar and towbar

Image

I don't have any pics of the mounts, but i can try and get some for you. When do you need them by?

The rangie is stored at a mates place and i am off to perth for a business trip on Saturday, so i can't make any promises.
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

http://www.outerlimits4x4.com/viewtopic ... highlight=


see Disco + 35s thread for pics/ideas on rear bar - may fit Rangie given chassis is same?
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

Thanks for the pics guys will give me something to work with now I got to get stuck in and get it going. :cool:
gas grass or arse no one rides for free
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 14 guests