Just need too know how to set the timing on a 91 30l V6 Pajero. like how many degs and what plugs need to be bridged
Any help would be appreciated
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
30L V6 Pajero ignition timing
Moderator: -Scott-
30L V6 Pajero ignition timing
ISUZU MU's and GEMINI's
[http://pig75.limewebs.com/index.htm]MY SITE[/url]
[color=red]If beef is in beef mince, What is in pet mince?[/color]
[http://pig75.limewebs.com/index.htm]MY SITE[/url]
[color=red]If beef is in beef mince, What is in pet mince?[/color]
On mine, there's a single pole round (brown?) connector near the firewall on the passenger's side. With this connection shorted to ground the ignition timing is set to whatever the spec is (gee, I'm great help tonight! 
)
I think it's supposed to be 5 degrees BTDC with the connector shorted, which (from memory) was 10 degrees without the short. You may find you can run a little more - listen out for pinging, and retard as necessary.
)I think it's supposed to be 5 degrees BTDC with the connector shorted, which (from memory) was 10 degrees without the short. You may find you can run a little more - listen out for pinging, and retard as necessary.
Last edited by -Scott- on Thu Mar 27, 2008 6:19 am, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 26 guests