Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clutch gone?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Clutch gone?

Post by macklux83 »

Hi guys, went to drive my car today after replacing the rear diff housing and it wont move at all when in gear, it was driving fine yesterday but now it will not move at all. I can put it in gear with the engine running and it does not stall.
I'm guessing it is probably a clutch but why would it go bad like that overnight?
cheers
rob
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Did you remember to refit the tailshaft? :D
Top
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

sure did :cool: and its not still jacked up...
Top
Posts: 228
Joined: Sat Dec 11, 2004 9:36 am
Location: Latrobe Valley Victoria

Post by Troopy93 »

Did one of your mates put the transfer case in neutral???
93 1HZ Troopy Double Locked, Lifted and Gassed with NO Benefits by D-GAS

D-GAS= Dont - Give A Shit
Top
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

Nope transfer case is in gear
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

were there gears in the new housing :P
Top
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

yep put my old diff center back in so that shouldn't be the problem
Top
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

probably not your clutch. If you were messing with your rear diff chances are it's your rear diff.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Top
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Post by ssfabricator »

is the tailshaft spinning
if hydraulic clutch check oil lines master and slave cylinder
If i just overtook you head to your nearest mechanic
Top
Posts: 134
Joined: Sat Feb 05, 2005 12:35 pm

Post by macklux83 »

OK, have had some time to check and yes the tailshaft is spinning while the car is in gear. so im guessing hopefully it is just an issue with the diff center not being in correctly, can anybody tell me what i might have done wrong, is it possible to put them in upside down or anything dumb like that?
cheers
rob
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

to be honest if you have managed to fit a centre and get no drive at all it is time to take it to someone who knows what they are doing


ps you did refit the axels didnt you?


if you could put it in upside down the car would have 5 reverse gears n 1 forward
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests