Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 diesel hilux with 2.4 turbo fitted

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

2.8 diesel hilux with 2.4 turbo fitted

Post by thehanko »

Hi im looking at getting an 89 lux, the guy bought it because it had a really good motor (260k, read good condition, running well) and then has fitted a 2.4 turbo to it. he has offered to have the vehicle dyno tuned before i buy it as it has not been tuned since the turbo was fitted - this was his offer as he said he didnt want to sell a car which might be running on a bad mixture. since he put the turbo on he has bought a much newer car and not finished this project or registered it yet.

the car seems to be in great condition, but im a little concerned about the turbo situation - as long as it comes home from the dyno running well could i assume its ok?

are there any inherant problems fom fitting the toyota 2.4 turbo to the 2.8 engine - im told its a common conversion.

I basically want a cheap work horse.

Thanks
Top
Posts: 172
Joined: Thu Aug 09, 2007 7:03 pm
Location: Torbanlea QLD

Post by Burdy »

yea mate i had the same setup on my lux and i was running 14psi boost i had no drama's with it but i wouldn't advise u to run it with that about of boost for too long
MUD BEERS & MAYHEM 4x4 and SOCIAL Group
5 inch lift,33 MTZ's,240 XGT's,3 inch dump & exhaust and more to come
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

I get the impression 8psi is a more normal boost pressure. does that sound right?
Top
Posts: 172
Joined: Thu Aug 09, 2007 7:03 pm
Location: Torbanlea QLD

Post by Burdy »

yea it's either 7 or 9 psi boost they run standard
MUD BEERS & MAYHEM 4x4 and SOCIAL Group
5 inch lift,33 MTZ's,240 XGT's,3 inch dump & exhaust and more to come
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

I run 10psi in mine and make 78kw at the wheels. Which I'm pretty happy with seaming they are 33 inch tyres which would take a bit of power away from the reading.
Top
Posts: 65
Joined: Tue May 15, 2007 8:01 pm
Location: bundaberg

Post by gutlux44 »

I have 96 2.8 with 2.4 surf turbo, runs 10psi with 35's and my mates denco turbo kit designed for the 2.8 cant even come close to keeping up with me.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

How Hard is it to increase the boost? I havent owned a turbo for some time, any pictures showing where to fiddle would be great.
Top
Posts: 22
Joined: Mon Mar 03, 2008 1:00 pm
Location: Perth, W.A.

Post by timmay5.7 »

This site should help out, go to the techsite..
http://toyotasurf.asn.au/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests