Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

high range gear ratio for TT 4.9 box

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

high range gear ratio for TT 4.9 box

Post by dank »

Might be a stupid question but what is the high range gear ratio in the trail tough 4.9:1 transfer case gear set?

trying to work out how much difference in rpm there will be between my sierra 5spd and a trimatic auto with 1:1 final drive...

thanks
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

I worked on 16% above stock, which is 1.409, so it comes out at 1.63.

PS the Novak conversions gearing calculator doesn't seem to work properly since they "upgraded" the site.

Gearing will be the same as your car in 4th now.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

yeah i just noticed that....thanks

also steve the gearbox is actually one out of a AE71 not a KE70 (which is K series bellhousing) corolla and it is a jatco box that bolts up to 4age not a trimatic apparently. This corolla guru I spoke to said that there weren't trimatics that came out they were jatco boxes...

also confirmed with toyospares as well...hopefully this will work with the vitara output, otherwise can i just use a corolla jackshaft and adapt something out of that?
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Gwagensteve wrote:I worked on 16% above stock, which is 1.409, so it comes out at 1.63.

PS the Novak conversions gearing calculator doesn't seem to work properly since they "upgraded" the site.

Gearing will be the same as your car in 4th now.

Steve.
I can probably live with that....its a revvy engine anyway....so it should be ok
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Gwagensteve wrote: PS the Novak conversions gearing calculator doesn't seem to work properly since they "upgraded" the site.
Yes, it's been no good since then. I'm using the one on iZook

http://www.izook.com/gearcalc.htm
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

You can get plenty of good gear for the jatco boxes like shift kits and full maual valve bodies etc, they run them behind VL turbos
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

thats good to know thanks mate.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests