Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will a A/C Kit for a TB42 fit a TD42?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

Will a A/C Kit for a TB42 fit a TD42?

Post by GQRob »

I have a Nissan AC kit for a GQ tb42 (new in box, was for my old car) and am in the process of buying a GQ TD42 vehicle that has no AC :(

Will most of the kit be ok, does anyone know parts that are different? ie is the compressor the same, pipes the same, mounting brackets...? I'm hoping I can get away with most of it and just get the few parts that are different from a wrecker.

Thanks for your help.
Posts: 146
Joined: Wed Nov 13, 2002 2:43 pm
Location: outside the migration zone

Post by Snatchy »

the compressor, pipes, and that stuff is close enough to be the same. i have a TD42 where a TB42 used to live, and the full aircon system was retained in the vehicle without depressurising it.
Sorry but can't remember if the brackets to hold the compressor to the engine were the same. might have had to turn a hose a bit to go around the alternator or something similar, but i would be confident that in the main your kit will be fine (except compressor brackets unknown)
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

Post by GQRob »

Sounds good, yeah I expect something to be a little different on the front of the engine as I think the main pulley is different (trying to remember my old car). When I get around to doing it I'll update this post.

Thanks

I hadn't thought of that angle, ppl who have replaced TB42 with TD's. Good one.
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

diesel power!
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 57
Joined: Thu Jun 21, 2007 9:36 pm
Location: Warrnambool

Post by hzj75 »

Im re-fitting Air con back onto a TD42 SWB I bought

for the TD42 there were 3 different kits that were put onto them, and each kit had a different wiring loom for it

there was

OE (Nissan)

OE (Local Nissan Dealer Fitted)

Aftermarket Kit fitted by auto electricians

Some models used flare fittings and some used O'ring fittings

Hope that helps
Posts: 25
Joined: Fri Apr 20, 2007 3:15 am
Location: Geelong, Victoria

Post by GQRob »

Ok thanks. The kit i have is a genuine nissan one, still in the box.
Post Reply

Who is online

Users browsing this forum: No registered users and 62 guests