Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

which Diff Centre

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Posts: 38
Joined: Sun Oct 28, 2007 9:52 pm
Location: Whyalla, SA

which Diff Centre

Post by harlequin »

can some one tell me the difference between a 75 series diff centre pre 1990 & post 1990 i got one off the big E few months ago guy said it was 1987 then got a complete 60 series rebuild kit for it the plates fit in but the spring wont it is 43mm wide 40mm long and the original out of the centre is 39mm wide and squashed to 33 mm long the side gears are 30 spline so i think that is ok the spring retainer is different to the one shown in the workshop manual the one i have has no centre tube and locator pins are a different configuratiion two instead of three, also mine has three clutch washers and three thrust washers on each side my manual shows four thrust washers and this is what the kit came with what have i got help please andy
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest