Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Manual Locking Hubs- Broken Spring

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 44
Joined: Wed Aug 17, 2005 3:38 pm
Location: w.a

Manual Locking Hubs- Broken Spring

Post by mitch86 »

Hey,

Have a SWB Vitara. The spring inside the manual locking hub has snapped. is there a company that can make new springs?

local wrecker wanted $100 for a whole hub that was older than mine. wouldnt sell spring seperate.

Cheers.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Ask another wrecker.

Custom springs are expensive.

Ps why did the spring break? I've never seen that before.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Post by v6hilux »

Gwagensteve wrote:Ps why did the spring break? I've never seen that before.
I've seen it heaps of times with the AISIN hubs.
I'm the sharpest tool in the shed!
Top
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

There is supose to be 2 springs in the hub, Ive seen some very neglected hubs but never seen a spring break either.
If you have a manual check that first, or undo the other side to compare.
Nik
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

hey i have a set. pm me to sort it out if you want

or get a new warn set, they are strong as.
cheer up emo kid
Top
Posts: 141
Joined: Tue Sep 25, 2007 3:45 pm
Location: Cairns

Post by chops_Drover »

Just go to a spring works place they will make up a new spring for about $10. Thats what I was quoted.

I had never heard of the springs breaking either before this happened. The hub wasn't in the best nick though when I pulled it apart.
"85 drover, 1.6 EFi Vitara donk, 2" BL, 2" susp lift, exo cage, 31" BFG muds, 6.5's, lockright rear, birf rings & front locker, soon to be RUF"d
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

zook4fun wrote:hey i have a set. pm me to sort it out if you want

or get a new warn set, they are strong as.
I'd put money on them not being as strong as Aisin.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

have both sitting on my bench. the warn set use thicker gauge springs and have nearly a full turn to lock in. look stronger to me.
cheer up emo kid
Top
Posts: 44
Joined: Wed Aug 17, 2005 3:38 pm
Location: w.a

Post by mitch86 »

cheers.

well theres only one spring not two in mine. and its snapped dead in the middle. was always hard to turn but i put to much pressure on it and i think thats what caused the snap, plus it was coverd in rust.
Top
Posts: 79
Joined: Sat Jan 13, 2007 5:47 pm
Location: Ulverstone/Tassie

Post by bigzuk »

mitch86 wrote:cheers.

well theres only one spring not two in mine. and its snapped dead in the middle. was always hard to turn but i put to much pressure on it and i think thats what caused the snap, plus it was coverd in rust.
i had the same issue only i had no rust on mine....made it rather difficult for the rest of the day being in 2 wheel drive :x
i have a drover

its pink.

that is all.
Top
Posts: 44
Joined: Wed Aug 17, 2005 3:38 pm
Location: w.a

Post by mitch86 »

you should be able to still put in 4x4 ! would of been a pain in the but in 2wd.

once the hub case is off an spring is already out you can use your fingers to engage it in or out for temp fix.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 74 guests