Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cams approved rollcages

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 53
Joined: Fri May 23, 2003 1:13 pm
Location: Camperdown Vic

Cams approved rollcages

Post by AndrewT »

Does anyone on this board have a copy of the 2000 CAMS manual or know the specifics of whats required to comply with building a cage for winch challenge type comps- i.e pipe wall thickness seamless or not etc
Everyone I talk to seem pretty vaig.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Cams approved rollcages

Post by bogged »

AWILL4x4 will know it, he makes them, he made the cage for that V12 thing that races cars, that yank thing...

nothign on www.cams.com.au ??
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

talk to Awill4x4 on this board, he will be able to build you a cams approved cage (thats if you are in melbs)
www.overkill4x4.com
ph 94766137
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

Try Pete at Gondwanaracing if you are in Brisbane:

http://Gondwanaracing.com.au
Built, not bought.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Or cheezy
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Do you need a CAMS approved to enter or is it just a suggestion as i thought to have a CAMS approved rollcage as a requirement for the event requires all drivers to be CAMS approved, the event to be CAMS approved which is a major headache. You will also fid that CAMS approved for is for high speed rollovers/accidents not 4wheeling which is usually of a less violent nature.
Ransom note = demand + collage
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

I know this isn't CAMS stuff, but if you want to read up about what the roadworthy requirements for a roll cage are (in Vic) you can find them here:

http://www.vicroads.vic.gov.au/vrne/vrn ... ment&Area=[Road+safety+hidden+documents]
DMA Founding Member #1 - Now Retired
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests