Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How long is your Jeep?
Moderator: GUtripper
How long is your Jeep?
G'day all,
Just interested to know, what is the wheelbase of a jeep Wrangler, in stock form, and if you have made the wheelbase longer, what does it measure now? and was it worth it ??
Just interested to know, what is the wheelbase of a jeep Wrangler, in stock form, and if you have made the wheelbase longer, what does it measure now? and was it worth it ??
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Hey Das
The standard WB of a TJ is 93.4" (2373mm) as to moding wheel base no i have not done it and prob never will on my CJ
Heaps of info here if you need it http://www.jjournal.net/jeep/jeep/tj/
The standard WB of a TJ is 93.4" (2373mm) as to moding wheel base no i have not done it and prob never will on my CJ
Heaps of info here if you need it http://www.jjournal.net/jeep/jeep/tj/
JLer is on the money.
As you lift it though, say 4-5" to fit some 35's it will decrease in wheelbase to around 91".
Lengthening the wheelbase to around 100-110" is a big job and requires extended custom made control arms, moving shock mounts and spring perches in the rear and moving the fuel tank into the back area and chopping out some of the floor etc.
If you want more detailed info about stretching one let me know.
cheers
z
As you lift it though, say 4-5" to fit some 35's it will decrease in wheelbase to around 91".
Lengthening the wheelbase to around 100-110" is a big job and requires extended custom made control arms, moving shock mounts and spring perches in the rear and moving the fuel tank into the back area and chopping out some of the floor etc.
If you want more detailed info about stretching one let me know.
cheers
z
stock is 93.4, with 35's, 4.5" of lift and long arms mine was 91"... now stretched it to about 100.5" by moving the rear axel back...
Last edited by FireTruck on Wed Dec 17, 2003 12:27 pm, edited 1 time in total.
www.TeamFireBug.com
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
FireTruck wrote:stock is 93.4, with 35's, 4.5" of lift and long arms mine was 91"... not stretched it to about 100.5" by moving the rear axel back...
What length are the springs now, something like 4" lift in the front and 2" lift in the rear isn't it and still sitting level
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Oh yea - is it worth it?? Can't say 100% yet as I haven't wheeled it enough yet.
I can say that from the little I have done it is much more stable and feels great. I think it has some to do with the extra wheelbase, and some to do with the improved link geometry.
Also helps to get a longer rear driveshaft which can be a bitch on lifted TJ's.
I had to re-do the rear suspension anyway, so I figured I may as well load for bear. If I was in the same position I would do it again... I like the extra length.
I can say that from the little I have done it is much more stable and feels great. I think it has some to do with the extra wheelbase, and some to do with the improved link geometry.
Also helps to get a longer rear driveshaft which can be a bitch on lifted TJ's.
I had to re-do the rear suspension anyway, so I figured I may as well load for bear. If I was in the same position I would do it again... I like the extra length.
www.TeamFireBug.com
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Not necessarily chassis changes Wodders, but definately some major mods!
I didn't cut or change my chasis, but did move the rear coil buckets, cut out the stock cross member, lift the fuel tank into the rear compartment, etc...
I didn't cut or change my chasis, but did move the rear coil buckets, cut out the stock cross member, lift the fuel tank into the rear compartment, etc...
www.TeamFireBug.com
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
noticeable difference between 91 and 100" for sure!! Particularly on steep up and down hills.
Ramp over angle is actually better now, because I went from 35's to 38.5's, and changed mt t'case to an Atlas, lifted my t'case skid a couple of inches etc.
Turning circle is worse now because I am now running wider axels and Detroits rather that ARB's before...
As you can see, kinda hard to compare apples with apples!!
Ramp over angle is actually better now, because I went from 35's to 38.5's, and changed mt t'case to an Atlas, lifted my t'case skid a couple of inches etc.
Turning circle is worse now because I am now running wider axels and Detroits rather that ARB's before...
As you can see, kinda hard to compare apples with apples!!
www.TeamFireBug.com
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Who is online
Users browsing this forum: No registered users and 5 guests