Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU Dash drops out with headlights on

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

GU Dash drops out with headlights on

Post by LUX90 »

I have a problem with my GU ST ute at the moment which is making me pull my hair out. Sometimes when you turn the lights on after a few minutes all gauges stop working as though you have turned the key off. Speedo and tacho will sometimes stop where they are when it happens, Other times they drop to zero. If you turn the lights off they all come good again within a few minutes.

Ive tried getting wiring diagrams out of Nissan before but they wouldnt give them to me. I have already removed the cluster, resoldered the joints, cleaned and tightened terminals. I have also tried removing the instrument fuse with the car running to see if it is losing power on that circuit, but it doesnt act the same. Im really stuck without a wiring diagram and the problem is really starting to annoy me.

Does anyone have any suggestions as to what a cause would be? Or where the earth points for the cluster are?
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Its the std crappy earthing nissan does.

Run new earths to body & chasis.

All will be fixed.
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

Bad JuJu wrote:Its the std crappy earthing nissan does.

Run new earths to body & chasis.

All will be fixed.
x2 ;)
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

Post by LUX90 »

Ok i have run new earths between the engine and negative and the body and negative, Problem is still there. Still trying to get a wiring diagram, Any other suggestions as its really F*$king annoying not being able to drive at night
Posts: 43
Joined: Mon Oct 23, 2006 8:47 pm

Post by gq banger »

Do you have aftermarket driving lights & wiring fitted to your vehicle?? Does the problem only happen when your lights are on high beam & the driving lights are working? If so I would be checking the driving light wiring as this in the most common fault for this
Posts: 17
Joined: Thu Sep 21, 2006 10:03 am
Location: Perth, WA

Post by Josh_WA »

mne did this after i got a new cd player installed, i took it back, they fixd it. some kind of shorting issue i think they said, mesy wiring.
Posts: 75
Joined: Thu Apr 14, 2005 10:56 pm
Location: Brissie

Post by LUX90 »

Ok got it sorted out, sent it to a gauge specialist and they have tested everything. There was a crack in the board or something where the power supply was for the gauge control module. Crack opens up = Ute with no gauges. Glad its finally sorted. PM me if anyone wants to know who fixed it for me
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests