Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PCV valve position

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

PCV valve position

Post by kond »

HI
I have a td42 with aftermarket dts turbo system and i want to run the pcv valve into the intake my question is do i put it before the turbo but after the air filter or not if not where do i put it


Cheers
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

diesels generally don't have pcv valves, they just have a breather hose.

yes it goes between turbo and air filter. while you are at it, a catch can would be good too.
Top
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

Post by kond »

Thanks verry much for the help Tweak'e
Top
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Contact:
Contact MyGQ

Post by MyGQ »

best idea is to run a catch can off the TD42 breather, then run it from there to the inlet pipe on the turbo before the turbine but after the filter
that was its getting the air balance right
AA's for Quitters
Top
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

Post by kond »

Thanks guys great help
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest