HEY GUYS
I HAVE A 2001 MK TRITON 3.O V6 AND AM LOOKING AT PUTTING A NEW EXHAUST ON IT. SOME SAY DO EXTRACTORS AND SPORTS EXHAUST, SOME SAY ROCKET MUFFLER, SOME SAY DONT CHANGE FROM STANDARD
WHAT DO YOU THINK
CHEERS
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
EXHAUST MK TRITON
Moderator: -Scott-
A mandrel bent exhaust or 'sport exhaust' is definatley worth it! A set of extractors leading on to a 2.5" or even a 2.25" MANDREL bent exhaust will go a treat. You will always get better performance out of the tried and true mandrel bent system than any other vortex type muffler claiming its just as good.
You'll notice that your fuel economy will rise due to the increased flow and reduced work the engine has to do, it will sounds beastier and gain heaps of torque.
I run mandrel's on all my cars, never look back at a crush bent..
You'll notice that your fuel economy will rise due to the increased flow and reduced work the engine has to do, it will sounds beastier and gain heaps of torque.
I run mandrel's on all my cars, never look back at a crush bent..
Suggest you do a search, the hiclone's come up 3 times in 3 weeks, with the usual outerlimits replies. You'll soon see what I mean. Welcome to the insanity, btw.
Re: exhaust, extractors and mandrel bent 2.25"->2.5", as suggested. Just make sure there's no restrictions on the inlet/outlet of your cats and mufflers that are smaller than your new exhaust.
Re: exhaust, extractors and mandrel bent 2.25"->2.5", as suggested. Just make sure there's no restrictions on the inlet/outlet of your cats and mufflers that are smaller than your new exhaust.
Who is online
Users browsing this forum: No registered users and 10 guests