Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
IFS SUPERLIFT?
Moderator: -Scott-
IFS SUPERLIFT?
L200 ANIMAL
3" body lift
2" suspension lift
35" tyres-cooper stt's
3" body lift
2" suspension lift
35" tyres-cooper stt's
SAS = Solid Axle Swap, others refer to it as doing an SFA (Solid Front Axle). I'd love to do it to my Jeep but the cost is soooo much.dig3283 wrote:i seen lots people write bout this sas what is it? also i spoke to snake racing late last year they said they were doing one for triton and would have it done by the end of march and would be around the 4000 dollar mark.
05 KJ Cherokee 4" lift on 16x8 Soft 8's & 265/70/16 STT's
01 NM Pajero with Bridgestone AT's 265/70/16
01 NM Pajero with Bridgestone AT's 265/70/16
I can't advice you on that, as the Mitsi is new to me. But I have to ask, why would you want to do it when you already have a combined 5" lift and running 35's?cms wrote:what axle would you use? could you get one to match the rear? or would both need swapping??
If it were me, I'd not do it. I'd be looking for an old rig that you can build that's already got live axles front and back.
CD
05 KJ Cherokee 4" lift on 16x8 Soft 8's & 265/70/16 STT's
01 NM Pajero with Bridgestone AT's 265/70/16
01 NM Pajero with Bridgestone AT's 265/70/16
this is a "sas"
http://www.outerlimits4x4.com/ftopic125224.php
http://www.outerlimits4x4.com/ftopic125224.php
91 Pajero GLS
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
32 BFG'S
and a lot of scratches
I Hate Lantana!!!!!
for a SAS kit?dig3283 wrote:i seen lots people write bout this sas what is it? also i spoke to snake racing late last year they said they were doing one for triton and would have it done by the end of march and would be around the 4000 dollar mark.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
I think he's talking about the price of the ifs kit there.j-top paj wrote:dig3283 wrote:i seen lots people write bout this sas what is it? also i spoke to snake racing late last year they said they were doing one for triton and would have it done by the end of march and would be around the 4000 dollar mark.
for a SAS kit?
[quote="Ruffy"]P.S. woober woober is a technical term describing the audible tone emitted from harmonic air vibration.[/quote]
F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
true, but the reason is the angle of the driveshafts and wisebones,But I have to ask, why would you want to do it when you already have a combined 5" lift and running 35's?
a mate of mine who give his truck alot of stick is busting cv's all the time,
looking in to lowering the diff to help cv's but would be nice to lower the wisebones aswel
L200 ANIMAL
3" body lift
2" suspension lift
35" tyres-cooper stt's
3" body lift
2" suspension lift
35" tyres-cooper stt's
Who is online
Users browsing this forum: No registered users and 2 guests