As it's time to change the airfilter element in my Frontera (3.2 V6), I was thinking about one of these reusable type filters.
Has anyone used these on petrol EFI vehicles as i'm worried that the oil in the filter will affect the MAF (mass air flow) sensor. These engines, like the Jackeroo 3.2\3.5 V6s, use a hot wire MAF sensor, and if this wire becomes contaminated they run rich.
Any help\ info would be great....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Finer Filter\ Unifilter
Moderators: toaddog, TWISTY, V8Patrol, Moderators
I would stay away from these type of filters as they tend to desintegrate over time allowing bits of foam to clog up air flow meters, etc. Turbo reconditioners love them, not!!
Try K&N for a better quality unit, but cost $$$
Try K&N for a better quality unit, but cost $$$
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
..
was gunna sugest the same thing with a k&n i have 1 here 2 replace the unifilter 1 i have i there now but its a custom airbox and that but i found the uni filter 2 choke the motor even tho its designed 4 and injected 5ltr
HYPOFAB Thanks to:
Polyperformance
Yuri 4x4
Longfield
..
yes mate u can buy a filter cleaning kit from k&n u can buy these where ever u buy ya filter from my filter cost me like 120 and the kit is like 30 or sumthin but yes they r reusable many many many times more than a foam filter like uni or finer
HYPOFAB Thanks to:
Polyperformance
Yuri 4x4
Longfield
I run a finer filter in the Paj for the last 3 yrs.
I find that I have to clean it more often than with the old paper one. So where was all that extra crap going ??? Into the engine ???
I do 3-4 High Country trips per year and have to clean the foam element after each trip not so with the old paper element so obviously it collects more stuff.
No power increase, and I always have a spare outer band ready to put in.
I find that I have to clean it more often than with the old paper one. So where was all that extra crap going ??? Into the engine ???
I do 3-4 High Country trips per year and have to clean the foam element after each trip not so with the old paper element so obviously it collects more stuff.
No power increase, and I always have a spare outer band ready to put in.
Bitsamissin wrote:I run a finer filter in the Paj for the last 3 yrs.
I find that I have to clean it more often than with the old paper one. So where was all that extra crap going ??? Into the engine ???
I do 3-4 High Country trips per year and have to clean the foam element after each trip not so with the old paper element so obviously it collects more stuff.
No power increase, and I always have a spare outer band ready to put in.
Just spent 4 days tooling around O'Tools flat (Donleys Crk. Aberfeldy) and the air cleaner element (stock) was like new when I left and now it's knackered. So I wan't one that I can reuse....
Thanx again Hypo......
Who is online
Users browsing this forum: No registered users and 130 guests