Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

twisted axle gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 18
Joined: Thu Mar 01, 2007 6:42 pm

twisted axle gq

Post by bcrheat »

hi guys . on installing lockers have picked one of my rear axles is twisted. Just after some advice on if the only option is to go genuine nissan or if there is after market ones available.If so what is recomended. also only one axle is twisted . Should i put two new ones in while it is all apart?
thanks
Top
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Contact:
Contact Big Red Toy

Post by Big Red Toy »

if you can afford it, wouldn't be a bad move to replace both rear axle's whilst your at it
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

ive twisted a couple of rear axles so far, and at the moment your only option is to buy second hand ones,
or genuine if you can afford that,

there is talk of Cromolly rears but they will be along way off yet,

if it were me id replace the twisted one and keep driving it
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

ozy1 wrote:ive twisted a couple of rear axles so far, and at the moment your only option is to buy second hand ones,
or genuine if you can afford that,

there is talk of Cromolly rears but they will be along way off yet,

if it were me id replace the twisted one and keep driving it
Not really....can have a custom shafts cut. Not a big deal if shop has the equipment. But expensive.
www.rmp-o.com
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

they do "unbreakable" axles for gu, ill try and find out the name of the place.
turbos are nice but i'd rather be blown
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

RMP&O wrote:
ozy1 wrote:ive twisted a couple of rear axles so far, and at the moment your only option is to buy second hand ones,
or genuine if you can afford that,

there is talk of Cromolly rears but they will be along way off yet,

if it were me id replace the twisted one and keep driving it
Not really....can have a custom shafts cut. Not a big deal if shop has the equipment. But expensive.
i do know you can get custom axles turned, i should have mentioned for the cost, i personally will run factory until there is a produced bolt in alternative, as cost is a factor for myselfm
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

hey I am not buying them either! But they can be made, that is all my point was. Heard you can also get "strengthened" R&P made.
www.rmp-o.com
Top
Posts: 381
Joined: Wed Sep 22, 2004 4:18 pm
Location: northside bris.QLD

Post by tuf355 »

i have tried hi-tuff axles but no luck ,they snapped ,we could of tried others but to hard to test. we think the up and down flexing was the cause . any contact details on the other types of after market stronger axles ? running GU rear diff.
thanks to~ ON & OFFROAD MECHANICAL , F.A.T BARS , ARB COOPERS PLAINS , WM MOTORSPORT , 2DEXTREME , DIRECT CLUTCHES & FOURBY`S
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 7 guests