what non "bolt on/off" panels etc.. are usefull/sort after on a zook?
the last zook i cut up, someone wanted the rear floor to extend theirs.
and someone else wanted the A pillars.
what else can be reused on another zook?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cutting up a zook, what can be reused?
cutting up a zook, what can be reused?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
yeh pretty muchdad wrote:i thinks he's cutting up an immaculate tin top *cringe*
the doors, bonnet and front clip are getting picked up in a few hours so i dont want half a car sitting in my driveway for too long, it will look like shit
so id like to get rid of whats left ASAP
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
yeh i know, the other one we cut up on AUS day didnt take much.. but there was a fair bit of rust in every panel so not much was salvagable...built4thrashing wrote:It doesnt take much to cut a sierra in half. me and a mate cut one just before the b pillar with 1/2 a 4 inch grinder disc.
this one is in good cond so i dont want to cut it up if there are parts that can be used and are usefull to someone
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
nah its a hardtop. i know soft tops are easy to pull apart and most/all panels can be unbolted.alien wrote:if its a soft top the sliders on the targa bar and the channel at the top is hard to come by at a wrecker...
im looking at parts that cant be unbolted. parts that need to be welded back in etc...
because if not much is usefull it will probably be cut up by next weekend and in the bin.
id prefer to be able to help someone out rather than throw it away
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
i was actually thinking that this arvo.built4thrashing wrote:the soft top we cut in half is being used to make a camping trailer. would have used a Hard top but this was just the right price.
had an idea of putting a bed in it and storage drawers under it.
and where the engine was id put some water/fuel tanks or something..
but i have too many projects ATM so it would probably sit there for a while
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
getting rid of it.ScrawnC wrote:I'd come grab the whole thing if I lived closer!!!! What do you want for it? Are you modding or just getting rid of it?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Cut the floor, tunnel and internal sill sections out. I've had to replace the floor in a sierra from rust - I can't be the only one.
Normally you'll only need the floor up to the seat mounts.
Steve.
Normally you'll only need the floor up to the seat mounts.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest