Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sputters and dies at idle

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Sputters and dies at idle

Post by SimplyPV »

driving condictions its ok, but if i'm doing some steady driving, then let off the gas to let the engine drop to idle speed (i.e. at a light) alot of times the engine dies instantly. also... i've managed to keep it running but it seems to try to idle at 500 rpms and keeps sputtering and wanting to die... wtf am i to do... :bad-words: the only way i can get around this while at a stop is to give it some gas myself so it doesnt idle at 500 rpm. i need this problem fixed and fast. any ideas?
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

didnt you have your head recently removed and repaired head gasket?
Posts: 410
Joined: Tue Jul 29, 2003 8:43 am
Location: Colorado Springs, Colorado

Post by Toyhatsu »

On top of the throttle body is a rubber plug. Under the plug is an idle adjuster screw. Bring the US Rocky up to operating temperature and adjust the idle. I can't remember which way to turn to increase idle speed but think that it is clockwise.

It took me about a year to get mine running right after I took it to get an emissions sticker...the garage really screwed things up and it still wouldn't pass emissions or run right after I got it back. They even installed a used computer at $200.00. The problem was mostly timing, a hotter spark plug and idle adjustment. I checked vacuum lines, sensors, removed and cleaned the throttle body...everything I could think of. It idles perfectly now and has great throttle response...have an extra computer now.

This could be a symptom of something else though like sensors, vacuum lines, timing etc. but you might try the adjustment screw on the throttle body...it's the easiest thing to do.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

The screw goes anti clockwise to increase the idle. Check your timing too- if it's retarded the idle speed will drop and cause the same problem.

Finally, there's a little device on the throttle body (called a dash pot from memory??) that stops the throttle from shutting closed completely and slowly allows it to close the last bees dick of travel. It's adjustable for the the time it keeps the throttle open- or your's may be stuffed.
David
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I had the same thing on my first engine. It turned out tp be the injectors needing cleaning.

Once this was done there were no longer any problems. Then the crankshaft went........
On boooooost!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest