Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What Engine fits?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 144
Joined: Wed Sep 06, 2006 8:44 am
Location: Warwick

Contact:
Contact loopy31

What Engine fits?

Post by loopy31 »

Hi Guys,
My 3B diesel has just done itself so I'm up for putting something else in FJ 70 Bundy. Does anyone know what alternatives may slot right in and where's a good place to source something? Doesn't have to be blue plated as it's only for 4x4 park use and play.
Cheers
Ian
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

the only thing that slots right in is a 3b. a 13bt will mount to the same gearbox, but will need other work to fit.

if you can source a gearbox out of a petrol, then the petrol range of motors (2f/3f/3fe) will go in without too many headaches.

other than that, it's conversion time, and imagination is the limit
Spit my last breath
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

just get another 3b.. easy to replace, cheap to buy and will keep going for ages if its a paddock basher.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 156
Joined: Wed Feb 20, 2008 12:02 am
Location: Gold Coast

Post by esp22 »

how much ks were on ure 3b before it died?
Top
Posts: 144
Joined: Wed Sep 06, 2006 8:44 am
Location: Warwick

Contact:
Contact loopy31

Post by loopy31 »

Not sure cos it was a petrol to diesel conversion when I got it...
I'm thinking maybe get a a cheapo 4L Commodore enegine and sling it in...want to keep the bucks down as its only a play vehicle
Top
Posts: 29
Joined: Mon Jun 27, 2005 9:47 pm
Location: Melb

Contact:
Contact O*N*E

3b engine

Post by O*N*E »

Ian

I got a 3b with a turbo sitting around for about a year now. I replaced it with a 13bt. I'm in melbourne if you're interested, we can try work something out.

Otherwise, 13bt is really worth considering. Its not that hard to change over. Nam and I put it in ourselves and we never done anything like that b4. only really minor differences.

Hoang
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

loopy31 wrote:Not sure cos it was a petrol to diesel conversion when I got it...
I'm thinking maybe get a a cheapo 4L Commodore enegine and sling it in...want to keep the bucks down as its only a play vehicle
what commo came with a 4l engine?
Spit my last breath
Top
Posts: 461
Joined: Thu Jan 01, 2004 7:23 pm
Location: Kuala Lumpur, Malaysia

Contact:
Contact BabyGodzillaGTi-R

Post by BabyGodzillaGTi-R »

1KZ? That would be my pick.....

Or better still a 2JZ and u'll have a nightmare round corners.
:twisted:
My RIG sucks big time.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

BabyGodzillaGTi-R wrote:1KZ? That would be my pick.....

Or better still a 2JZ and u'll have a nightmare round corners.
:twisted:
if we're being silly here, a 1fz-fe with turbo is good too
Spit my last breath
Top
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

bad_religion_au wrote:
loopy31 wrote:Not sure cos it was a petrol to diesel conversion when I got it...
I'm thinking maybe get a a cheapo 4L Commodore enegine and sling it in...want to keep the bucks down as its only a play vehicle
what commo came with a 4l engine?
none :D
brentz
TUF-60 starting build soon
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest