Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What solvent for parts washer

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

What solvent for parts washer

Post by Nev62 »

Just wanted to know what people are using for solvent in a parts washer. Not really found of using diesel/kero mix. this is manily because the vapours give me headaces and I have to share the garage with the other half who does not want the smell through all of her stuff.
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

there are proper solvents for this. with very very high flash points.
you can hold a lit oxy torch to it and it will not ignite.

google search for it, or ask a local mechanic
http://www.mothfukle-engineering.com/
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

i used to use a mix of 50/50 petrol/diesel. (because my dad filled his diesel cruiser with petrol when he first got it and had to drain his tank). I found the petrol really ate into the grease and shite and the diesel made it stick a lot more and stopped it from just turning to vapour. Having said that, it's probably not for you because you can really smell the diesel, and you have to use it in a reeeeeaaaaaly well ventilated area. I always used it outside coz i imagined it would be pretty volatile.

M
http://www.populationparty.org.au/
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

white spirits is what the lease companys use in their machines
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

castrol make a parts washer solvent to and is does not smell you can get it from repco
Posts: 60
Joined: Sun Jun 26, 2005 12:15 pm
Location: Melbourne

Post by Hatsu »

If smell is a real issue, you could use biodiesel.
It does feel a bit thicker than normal diesel, so perhaps get a litre and try it out for yourself and see if you like it first.
If you can find your local biodiesel club you could maybe even talk them into making it for you tax free, fuel is so pricey these days that filling your parts washer is more expensive than buying it!
:bad-words:
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

Hatsu wrote:local biodiesel club
They have clubs; do you know of one in Queensland Brisbane perhaps :?:
Kind Regards,
Brad
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

LuxyBoy wrote:
Hatsu wrote:local biodiesel club
They have clubs; do you know of one in Queensland Brisbane perhaps :?:
I don't think there's any up here, can't even get B100 stuff anywhere.
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

I know that the kincrome (rebadged cheapy) recomend only a water based degreaser.
I normally sell them Chemtech workshop degreaser which is water based to use in them.
Dont really know what works best but havnt had any complaints :)
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 60
Joined: Sun Jun 26, 2005 12:15 pm
Location: Melbourne

Post by Hatsu »

Have a look at http://www.biofuelsforum.com/
There's a QLD subforum on there.
Just tell them what you want and that you're willing to pay, you should be able to find someone to help you.
The clubs can be a bit secretive sometimes, they tend to think that the government is out to get them, but if you're wearing your tinfoil hat correctly you should be right, so see how you go.
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

Hatsu wrote:Have a look at http://www.biofuelsforum.com/
There's a QLD subforum on there.
Just tell them what you want and that you're willing to pay, you should be able to find someone to help you.
The clubs can be a bit secretive sometimes, they tend to think that the government is out to get them, but if you're wearing your tinfoil hat correctly you should be right, so see how you go.
:lol: Cheers
Kind Regards,
Brad
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Post by cooter »

heating oil we have used it in ours for years you can get it from petrol distributors for cheap
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 150 guests