Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
THE "silly" question thread
haha we dont have any tunnels or bridges in Darwin so thats not a problem for us lol....Gwagensteve wrote:Most GPS units don't have speed as a default page. i.e when you turn the car on, you have to go "looking" for speed. Also, you'll get no reading in tunnels and under bridges etc.
But I use my GPS as my odometer and Speedo sometimes its far more accurate than the one in the car... I used it on my Motor bike cos the digital speedo stops at 299km so I took it out for a run as the GPS records the top speed you do..... 
want33s wrote:This thread isn't about my car though.. bring on the stupid questions!
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
any one got checker plate or something like that?
i sent a e-mail to calmini the other day and they said they are not doing their flares any more.
this really sux in my eyes as i was keen to buy some.
as for the tj flares im not really keen on the shape unless i use rears all round.
sent a e-mail to mudbusters only to never get a reply.
bushwackers are too expensive.
i still dont know why its soo hard to get some some simple big flares for our cars.
this really sux in my eyes as i was keen to buy some.
as for the tj flares im not really keen on the shape unless i use rears all round.
sent a e-mail to mudbusters only to never get a reply.
bushwackers are too expensive.
i still dont know why its soo hard to get some some simple big flares for our cars.
Posts: 328
Joined: Sun Jun 27, 2004 10:35 pm
Joined: Sun Jun 27, 2004 10:35 pm
Location: Pimpin' zooks to disatisfied Jeep owners ;)
Contact:
Why use rears all round and what's the issue with the look? Bang for buck really, approx $250-400 for a whole set second hand. TJ drivers that upgrade to the super wide 6" flares usually want to flog 'em cheap.lexplay wrote: as for the tj flares im not really keen on the shape unless i use rears all round.
i still dont know why its soo hard to get some some simple big flares for our cars.
The front and rears actually look neat when done right in my opinion- all be it a lil' bias...
Need to mod rear right with a heat gun to shape it for the fuel inlet and also shape the rear corner of the fronts to contour nicely by trimming the inner wall a bit. End result...
Mike
People to do, Things to see ;)
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
the issue with the look is that they look goofy without the guards cut to match. They just look tacked on when you can see body panels underneath. What's the point may as well just use Bunnings garden edging to cover the tyres unless you do it properly and cut the body to actually gain some benfit of fitting the guards
Ransom note = demand + collage
Posts: 328
Joined: Sun Jun 27, 2004 10:35 pm
Joined: Sun Jun 27, 2004 10:35 pm
Location: Pimpin' zooks to disatisfied Jeep owners ;)
Contact:
Interesting comparison Graeme, TJ flares and garden edging... One is significantly cheaper, but I think quite agricultural in appearance and will just rip out on moderate contact with a rock or embankment
Mine don't appear 'tacked on', I've actually sprayed the previously visible arch black so it hardly even shows that it's there and they've been shaped properly as well. My tyres don't touch the arches at full flex and the other benefit is that they cover my tyres that stick out of the body by approx 5 inches. Perhaps you've generalised with other examples you've seen that do look, well, tacked on- as you say. I'm not a fan of how they usually look either and wouldn't bother doing it if mine looked like that. Garden edging though bud, c'mon...
The benefit to not chopping the guard is, as far as I know, retaining what very little panel strength sierra's have to start with. I have leant the side weight of my rig on those flares with nothing to worry about and can happily scrub embankments all day without tearing flares off or dinting/scratching side panels in the process. They've been fixed on with nut-certs as opposed to tek-screws, so they won't just tear out of the panels.
Each to their own though, I think Allans (pirhana) flares look nice, as do some 'home jobs' I've seen. Allans are a lil' heavy on the $$ side though.
Mike
Mine don't appear 'tacked on', I've actually sprayed the previously visible arch black so it hardly even shows that it's there and they've been shaped properly as well. My tyres don't touch the arches at full flex and the other benefit is that they cover my tyres that stick out of the body by approx 5 inches. Perhaps you've generalised with other examples you've seen that do look, well, tacked on- as you say. I'm not a fan of how they usually look either and wouldn't bother doing it if mine looked like that. Garden edging though bud, c'mon...
The benefit to not chopping the guard is, as far as I know, retaining what very little panel strength sierra's have to start with. I have leant the side weight of my rig on those flares with nothing to worry about and can happily scrub embankments all day without tearing flares off or dinting/scratching side panels in the process. They've been fixed on with nut-certs as opposed to tek-screws, so they won't just tear out of the panels.
Each to their own though, I think Allans (pirhana) flares look nice, as do some 'home jobs' I've seen. Allans are a lil' heavy on the $$ side though.
Mike
Last edited by raqmup on Thu Jun 12, 2008 4:43 pm, edited 1 time in total.
People to do, Things to see ;)
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
I know what you mean I end up resting on the guards often not that Im too worried about the panels but they just pop back into shape after they have been squashed.raqmup wrote: I have leant the side weight of my rig on those flares with nothing to worry about and can happily scrub embankments all day without tearing flares off or dinting/scratching side panels in the process.
That said my Sierra being a NT the front needed to match the front guards when it flexed the tire would be all over the fire wall.
..wrench, wheel, wreck repeat..
check out the action @ http://www.darwin4x4.net
check out the action @ http://www.darwin4x4.net
can't believe i'm sayin this for the first time.....shut up grimbo. your lwb was such a stunning thing to look at because?.......grimbo wrote:the issue with the look is that they look goofy without the guards cut to match. They just look tacked on when you can see body panels underneath. What's the point may as well just use Bunnings garden edging to cover the tyres unless you do it properly and cut the body to actually gain some benfit of fitting the guards
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Ok Grimbo's LWB was fawken hot in it's final incarnation and I agree with him here (and I hate agreeing with Grimbo just cause it's fun not to :p ) the blue one above is shat on by the white one below it in the looks department all because of the gaurd chopping.
That said I don't like them, I prefer bushwackers if going down that route.
That said I don't like them, I prefer bushwackers if going down that route.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
never said mine was good looking, that was never its intention, for gods sake I painted it orange. All I'm saying the flaresl ook goofy without the guards being cut. The white one works for me because the guards have been trimed as well. That's all.joeblow wrote:can't believe i'm sayin this for the first time.....shut up grimbo. your lwb was such a stunning thing to look at because?.......grimbo wrote:the issue with the look is that they look goofy without the guards cut to match. They just look tacked on when you can see body panels underneath. What's the point may as well just use Bunnings garden edging to cover the tyres unless you do it properly and cut the body to actually gain some benfit of fitting the guards
Ransom note = demand + collage
new question...
i have left my sway bar in the front. does this make me 'Silly'? i am debating to myself weather to make it quick disconnect or remove it completley.
i do drive it 70 kays one the road a day.
i have left my sway bar in the front. does this make me 'Silly'? i am debating to myself weather to make it quick disconnect or remove it completley.
i do drive it 70 kays one the road a day.
'Only Cheap Wine Comes in 5 Litres'
2" springs, 2" shackles, 2" Body Lift, 31" cooper st, 2.25" exhorst, extractors, pod filter, GTI engine, microtech, bullbar.
2" springs, 2" shackles, 2" Body Lift, 31" cooper st, 2.25" exhorst, extractors, pod filter, GTI engine, microtech, bullbar.
Take it off, go for a drive, if you don't like it, put it back on or make disconnects.crackatinny wrote:new question...
i have left my sway bar in the front. does this make me 'Silly'? i am debating to myself weather to make it quick disconnect or remove it completley.
i do drive it 70 kays one the road a day.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Similar question to above, but regarding the steering dampener...
has anyone noticed any adverse effects with out a steering dampener fitted??
I have had mine off for about a month, and steering feels much lighter/more responsive, turning circle feels much tighter, the only issue is the front left now rubs on spring at full lock.
has anyone noticed any adverse effects with out a steering dampener fitted??
I have had mine off for about a month, and steering feels much lighter/more responsive, turning circle feels much tighter, the only issue is the front left now rubs on spring at full lock.
Bump steer is a function of suspension and steering geometry and has nothing to do with the steering damper.
What you're referring to is kickback through the steering wheel. This will be mostly affected by rim offset - less offset = less kickback.
Power steering boxes are very good at eliminating kickback. On power steering equipped cars, there's very little to pick with the damper on or off. With a manual steer car, yes, the steering will be lighter without the damper on.
Steve.
What you're referring to is kickback through the steering wheel. This will be mostly affected by rim offset - less offset = less kickback.
Power steering boxes are very good at eliminating kickback. On power steering equipped cars, there's very little to pick with the damper on or off. With a manual steer car, yes, the steering will be lighter without the damper on.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I've always known bump steering as: you hit a bump and the wheel wants to rip out of your hands and steer where the tyres wanna go. I know my RTC steering dampner (Yes yes I know) helped combat this somewhat.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Who is online
Users browsing this forum: No registered users and 60 guests