Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lift to fit 37's

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

lift to fit 37's

Post by OL GQ UTE »

ive got a gq coil cab with 4-5inch suspension lift and 2 inch body lift and am getting 37's, just wondering what sort of lift you guys needed to clear 37's, am happy to cut guards if need be. have 35 inch procomp muddies atm and they clear fine
Top
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

Post by thunder »

they should fit fine with that lift..
you may need some decent offset on the wheels though(cruiser rims or the like about -23 or more)

mine did rub at the back.on the chassis and ute mount(GU) and offset fixed it.

more than likely you will trim the front guard.
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

my rims have been cut and flipped so offset is no problem, dont mind cuttin a bit of front guards
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

They will fit easy as.
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sloshy wrote:They will fit easy as.
wheres the photos of that dudes shorty with 37's and 2inch lift?
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

ill post mine up when i get the chance i did a shorty with 2 inch lift. ill get one tomorrow :)
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

shorty with 2 inch lift and 37's, surely that would need massive guard chops
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

OL GQ UTE wrote:shorty with 2 inch lift and 37's, surely that would need massive guard chops
so?
Better than lifting it 7+"
Ransom note = demand + collage
Top
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

gq

Post by micka1 »

I'm running 36 inch centipedes on my gq ute with only 3 inch spring lift and guard chopping , fits in alright and is nice and low .
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

grimbo wrote:
OL GQ UTE wrote:shorty with 2 inch lift and 37's, surely that would need massive guard chops
so?
Better than lifting it 7+"
7" is better cus most FAT CHICKS can't climb too high!!! :lol:
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

LMFAO sooo true
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

grimbo wrote:
OL GQ UTE wrote:shorty with 2 inch lift and 37's, surely that would need massive guard chops
so?
Better than lifting it 7+"
xGrimboteen
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

<img src="http://img211.imageshack.us/my.php?image=patrolxl9.jpg" border="0" />
Last edited by Duff on Wed Jun 11, 2008 3:07 pm, edited 1 time in total.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Image
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

lol thanks bogged
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Is that a 2 inch bodylift only?

Or a 2 + 2?

It looks bodylifted.
SWB mav. Some mods.
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

yer i forgot lol 2 + 2.
Top
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Nice! Thanks for that.
SWB mav. Some mods.
Top
Posts: 172
Joined: Fri Aug 19, 2005 5:34 pm
Location: Melbourne

Post by BushTuckerNed »

doesnt the amount of suspension lift mean stuff all??

if your car can compress the springs to the bumpstops, your gonna have to cut guards not matter wat lift.???

correct me if im wrong :D
www.mudrhino.com.au
Top
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

4''inch spring & 3''inch body lift with a small trim clear 38''s easy,
my brother had a GQ with just a 3''inch body lift & slightly trimed & it used to just scrape on lock to lock,, so i dont think you should have a problem with that lift maybe just trim the back of the front gaurd,,
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Top
Posts: 61
Joined: Thu May 19, 2005 8:39 pm
Location: Wodonga, Vic

Post by OL GQ UTE »

yeh i think i will trim the back of the fronts, maybe more if needed. when cutting guards do you guys roll them on the edges to attatch flares, or whats the best method of doing this?
had a quick look through the gq bible but nothing there
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

I used a 12mm bolt/round bar with a hacksaw slot endways the depth of the hacksaw blade. Slide the gaurd into the slot and bend it gradually, work your way from end to end of the wheel arch.
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

the way i cut mine was got a grinder and cut where i wanted trimmed and tig the edge back on. others i have seen have just cut where they wanted and that was it. then they used a truck mud guard for the flair to cover the tyres
Top
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Contact:
Contact bushy555

Post by bushy555 »

1991 GQ, 7" Snake racing coils, no body lift. 37" wranglers on 10" rims fitted beaut with no scrubbing at max artic. Didn't need cutting or even front arm spacers.

Currently running them on GU ute, 4" coils + 2" body. No cutting of the front, no front arm spacers are used, Slight rub on chassis rail at rear with the coil drop outs. Needs spacers - another illegal addition.

Fit on to 6x4 box trailor with 4" body, and 3" shackle extensions. Some slight scrubbing with a load of 1.4 tonne of sand (weighbridge weighed). Slightly over loaded just a tad.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Top
Posts: 580
Joined: Mon Jul 18, 2005 5:53 pm
Location: Toowoomba QLD

Post by mud_runner_GQ »

4inch spring and 2 inch body lift.

needed to cut the rear 1/4's as they rub on compression
Image
Image
but i also cut 2inches out of the guards
Image
Image
i have taken out the 2inch body lift and the 38's will still fit.
hope this helps
RIP BAXTER YOUR IN OUR HEARTS FOREVER
Vehicle: Red shorty short gq patrol..... with a bucket of cash spent on it
Top
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

if u want the flare to sit on the body line the easyest way is 2 go round the edge of the with 10mm masking tape,cut it on that line with a jigsaw & make the bottoms about 25mm more,, then run 15mm masking tape on that line & fold it over to the tape line with a hammer & dolly for your flares to screw on to, with that measurment the flare sits right on the body line & looks good
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Top
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

i'd send you some pics but not sure how to do it
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 10 guests