Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Kaymar or Opposite Lock

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 79
Joined: Sun Aug 08, 2004 5:36 am
Location: Heathcote,Sydney

Kaymar or Opposite Lock

Post by Grasshopper »

I am building a rear bar for a HZJ105 landcruiser and I am after the locking mechanism that Kaymar or Opposite Lock use on theirs. Kaymar will not sell you one and Op Lock want $150 for theirs. Any ideas where to locate one or does anyone have a damaged one laying around.
Dave
Top
Posts: 147
Joined: Sat Aug 04, 2007 1:28 pm
Location: Sydney

Post by little rusty »

I have just learnt how annoying Kaymar can be regarding selling their latches as a separate item... cost is $130 once you produce evidence of a damaged latch requiring replacement. How Australian...

Anyway, I know there is a lot of interest here regarding similar style latches and found Concept Latches on this forum. After speaking with them I have been informed that they have to buy in 10 from the US and would sell to us at $67 plus postage for the smaller item or $120 for the larger (who really needs 8000lb of rated latch???).

I want one not ten. So if there is enough interest I am hoping they can buy in ten or so and people building their own rear bars/carriers can shun Kaymar and buy directly through the guy I spoke to down there...

Let me know yuor thoughts please.
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

little rusty wrote:I have just learnt how annoying Kaymar can be regarding selling their latches as a separate item... cost is $130 once you produce evidence of a damaged latch requiring replacement. How Australian...
well, it is thier design. don't think they would like a latch with thier mark on it on some home made rear bar. good on em!
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

buy 10 and list the rest on ebay
Warn - Dont leave home without it
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

I've found most of the australian retail 4wd industry to be total utter bastards.... most are overpriced, most have bad attitudes, and almost all of them have no sense of time or reliability... Its no wonder most people's first thoughts are to go offshore...
The worst thing about censorship is ███████.
Top
Posts: 69
Joined: Sat Oct 09, 2004 10:24 am
Location: S.A.

Post by MAVRK-4 »

I source latches like these from U.E.S. (Universal Engineer's Supplies)

http://www.uesint.com/

Have just about all of them on display in their outlets.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

alien wrote:I've found most of the australian retail 4wd industry to be total utter bastards.... most are overpriced, most have bad attitudes, and almost all of them have no sense of time or reliability... Its no wonder most people's first thoughts are to go offshore...
and why the rest of the world can get enough australian made gear and pay lots of money for it....
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests